Eurotec Catalog Tangential Impact Sida 2
Kommersiell Kunderbjudande **Toppförsäljare från Eurotec
Impact wrenches approval IMPACT WRENCHES - PERMISSIBILITY FOR WOOD SCREWS Is the installation of screws by means of impact wrenches permissible? The intallation method (continuous rotation or tangential impact) of wood screws is not regulated either by EN 14592 or by the European Technical Assessments (ETA). Impact wrenches are especially useful for installing very long screws, so the question of its admissibility arises. To clarify this question, Eurotec wood screws made of carbon steel with a nominal diameter of 8,0 mm were subject of comparative tests. The screws were all installed with rotary drilling and tangential impact. Subsequently, pull-out resistance and tensile strength tests were made. This was done in each case with the longest partially and fully threaded screws in the most unfavorable material (softwood laminated veneer lumber). It was proven that the installation method has no significant effect on the load-bearing capacity of the screw itself or on its pull-out resistance. © Christian Delbert – stock.adobe.com Therefore, it is also possible to use an impact screwdriver (tangential impact) for driving Eurotec wood construction screws made of carbon steel with partial or full thread and a nominal diameter of 8.0 mm into solid wood, glulam, laminated wood beams or laminated softwood veneers. 2
6 Sidor | Gäller till 08/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.