ENERPAC - Industrial Tools Sida 9
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Single-Acting, General Purpose Cylinders Optional Carrying Handle CHM6 RC-TRIO Certified lifting eyes on cylinder models weighing 55 lbs. and above (RC5010 and heavier models). Interchangeable with optional carrying handle. Order model number CHM6. Series ▼ QUICK SELECTION CHART For complete technical information see next page. Cylinder Capacity tons (maximum) 5 (4.9) 10 (11.2) 15 (15.7) 25 (25.8) 30 (32.4) 50 (55.2) 75 (79.5) 100 (103.1) * Stroke Model Number Cylinder Effective Area Oil Capacity Collapsed Height Weight (in2) (in3) (in) (lbs) 0.99 0.99 0.99 0.99 0.99 0.62 0.99 2.97 4.95 6.93 9.04 2.24 4.76 9.23 13.70 17.88 22.64 26.82 31.29 3.14 6.28 12.57 18.85 25.13 31.42 37.70 43.98 5.16 10.32 20.64 32.25 42.56 52.88 63.20 73.52 53.56 22.09 44.18 69.03 113.21 146.34 97.49 208.82 41.26 136.77 211.45 1.63 4.34 6.50 8.50 10.75 12.75 3.53 4.78 6.75 9.75 11.75 13.75 15.75 17.75 4.88 5.88 7.88 10.69 12.69 14.69 16.69 18.69 5.50 6.50 8.50 10.75 12.75 14.75 16.75 18.75 15.25 6.94 8.94 11.13 15.13 18.13 11.25 19.38 8.63 14.06 17.69 2.2 2.3 3.3 4.1 5.3 (in) 0.63 1.00 3.00 5.00 7.00 9.13 1.00 2.13 4.13 6.13 8.00 10.13 12.00 14.00 1.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 1.00 2.00 4.00 6.25 8.25 10.25 12.25 14.25 8.25 2.00 4.00 6.25 10.25 13.25 6.13 13.13 2.00 6.63 10.25 RC50 RC51 RC53 RC55* RC57 RC59 RC101 RC102* RC104 RC106* RC108 RC1010* RC1012 RC1014 RC151 RC152 RC154* RC156* RC158 RC1510 RC1512 RC1514 RC251 RC252* RC254* RC256* RC258 RC2510 RC2512 RC2514* RC308 RC502 RC504 RC506* RC5010 RC5013 RC756 RC7513 RC1002 RC1006 RC10010 0.99 2.24 2.24 2.24 2.24 2.24 2.24 2.24 2.24 3.14 3.14 3.14 3.14 3.14 3.14 3.14 3.14 5.16 5.16 5.16 5.16 5.16 5.16 5.16 5.16 6.49 11.04 11.04 11.04 11.04 11.04 15.90 15.90 20.63 20.63 20.63 Capacity: 5 - 100 tons 6.1 4.0 5.1 7.2 9.8 12.0 14.0 15.0 18.0 7.2 9.0 11.0 15.0 18.0 21.0 24.0 26.0 13.0 14.0 18.0 22.0 27.0 31.0 36.0 39.0 40.0 33.0 42.0 51.0 70.0 83.0 65.0 130.0 81.00 130.0 160.0 Stroke: 0.63 - 14.25 inches Maximum Operating Pressure: 10,000 psi Think Safety Manufacturer’s rating of load and stroke are maximum safe limits. Good practice encourages using only 80% of these ratings! 80% Page: 404 Lightweight Aluminum Cylinders If you need a higher cylinder capacity-to-weight-ratio the RAC-Series are the perfect choice. 12 Page: Gauges Minimize the risk of overloading and ensure long, dependable service from your equipment. Refer to the System Components section for a full range of gauges. Page: 151 Pump and Cylinder Sets All cylinders marked with an * are available as sets (cylinder, gauge, couplers, hose and pump) for your ordering convenience. Page: 63 Available as a set. See note on this page. 7
424 Sidor | Gäller till 12/2023 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
