ELMAG Business News Sida 92
Kommersiell Kunderbjudande **Toppförsäljare från ELMAG
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
16 1 2 15 14 10 11 8 9 6 7 12 5 3 4 13 CPTX-I 400 2W Digital display and indicators: • Welding current A • Wire feed m/min • Time value sec 2. Digital display and indicators: • Welding voltage V • Correction value display +/• JOB No. 3. Parameter setting or display switching: A. m/min 4. Parameter setting or display switching: V. +/5. Display switching (FUNCTION): IS (Starting current), IE (Final crater flow) or function menu buttons • F1-19 Selection of internal functions or fine settings such as e.g.: F1 Non-stick time, F2 Non-stick tension, F3 Wire Feed Softstart, F6 Current increase time, F7 Current reduction time, F10 Switching off the fan-power saving function (Fan overrun ~ 10 min, ON=Fan continuous running), F11 JOB Memory, F12 Soft Arc Mode (CO2 SOLID), F13 Constant burn-in control, F15 Switch on starting current INITIAL state (only in 4-stroke or 4-stroke repeat mode), F16 Gas pre-flow time, F17 Gas after-flow time, F18 Power saving time or pump afterrunning time (20-60 min), F19 Switching off the pump power saving function (ON=Pump continuous operation) 6. Protective gas test button (GAS CHECK) 7. Wire insertion buttons (INCHING) Welding process indicators: • CO2 (100% CO2) • MAG (80% Ar/20% CO2) • MIG (98% Ar/2% O2) • DC STICK (MMA/E-Hand) 9. Material Indicators: • Steel Solid Wire (MILD STEEL SOLID) • MILD STEEL FLUX CORED • Stainless Steel Solid Wire (STAINLESS SOLID) • Stainless Steel Cored Wire Crater filling functions: • Crater Filler/Off (2-stroke) • Crater filler with start- & final crater flow (4-stroke) (Starting current only when activated = F15) • Crater filler with final crater flow repetition (4-stroke repeat) (Starting current only when activated = F15) CPTX-I 400 2W CPTX-I 500 2W TECHNICAL INFO Remote control directly on the feeder for welding current (A) or JOBs (1-10) or welding voltage or voltage correction as well as wire feed Liquid cooling hose package Optimal cooling of the welding torch also with the highest welding performance and duty cycle, a hose package with liquid cooling offers. Ideal for use in series production. * = ELMAG special program • Stitching function / spot welding function 11. Wire gauge indicators: • 0.8mm (CPTX-I 400 2W only) • 1.0mm • 1.2mm • 1.6mm (CPTX-I 500 2W only) Libo regulation (ARC CONTROL): • LIBO arc control hard -100/+100 soft "Hard" LIBO for low current & for longer current supply & return as well as burner lines • "Soft" arc for high current 13. Synergy/Manual Operation (SYNAESTHETIC./INDIV.): • When Led SYNERG. active - the welding voltage (V) is automatically adjusted to the set welding current (A, m/min.) adjusted accordingly • When Led SYNERG. inactive - the welding voltage (V) can be set individually and independently of the welding current (A, m/min.) 14. HIT ENTER: • Performs the administrative functions such as key lock, password & assignment of welding parameters to memory locations. Pressing more than 3 seconds activates the key lock to be adjusted 15. Save up to 30 jobs (SAVE) 16. Loading jobs (LOAD) Feed unit All CPTX-I models: > > > > Powerful wire feed motor Aluminium feed mechanism Four drive rollers Two interchangeable feed rollers for different wire thicknesses CPTX-I 400 2W CPTX-I 500 2W Connections for hoseliquid cooling package Coolant tank in the welding machine 91 WELDING TECHNOLOGY TOUCH ME CPTX-I 400 2W & 500 2W - Water-cooled
270 Sidor | Gäller till 03/2022 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.