Dynabrade - Industrial Katalog Sida 86
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Right Angle Wet Sander DISC PADS PAGE 249 WET TANK Air-Powered Wet Rotary Sander PAGE 263 FOR ABRASIVE DISCS For Slow-Speed Material Removal 5" (127 mm), 6" (152 mm), 8" (203 mm) diameter NOT INCLUDED • All models run 5", 6", or 8" diameter polishing pads. Pads sold separately. • Accepts variety of abrasive products including surface conditioning discs and film-backed discs. Model 51474 Rotary Motion • Water is fed through the center of pad directly to the work surface, providing optimum flushing of work surface and pad. This prevents buildup of sanding residue on the disc, allowing the tool to be used efficiently in any position. Independent water rinse allows flushing of the work surface without starting the tool. (All models on page) • High torque air motor with variable speed. Rear exhaust muffler reduces noise levels. DISC SANDERS • Safety-lock throttle and soft-grip handle (adjusts to left or right hand). Disc Pad Sold Separately (see page 240) Basic Models • Includes pre-assembled hook-ups, 95848 Gear Oil (2.5 oz. tube) and 95541 Grease Gun. Model 51474 0-2,000 RPM, 5/8"-11 Thread Model 51602 0-2,000 RPM, M14 Thread Model 51476 0-3,100 RPM, 5/8"-11 Thread Model 51603 0-3,100 RPM, M14 Thread Model 51479 Deluxe Models • Includes pre-assembled hook-ups and overhose assembly to reduce sound level. Also includes 96323 Air Line (3/8"), 95848 Gear Oil (2.5 oz. tube) and 95541 Grease Gun. Model 51479 0-2,000 RPM, 5/8"-11 Thread Model 51604 0-2,000 RPM, M14 Thread Model 51605 0-3,100 RPM, M14 Thread After using your wet tool, wipe the tool down with a clean, dry rag and let dry. Then store the tool with the sanding pad face down. As 51479 is run, water is fed through pad center directly to work surface. Model Number Motor hp (W) Motor RPM Pad Dia. Inch (mm) Sound Level Maximum Air Flow SCFM (L/Min) Hose I.D. Size Inch (mm) Air Inlet Thread Tool Thread Weight Pound (kg) Length Inch (mm) Height Inch (mm) 51474 .7 (522) 0-2,000 6 (152) 82 dB(A) 43 (1,218) 3/8 (10) 1/4" NPT 5/8"-11 Male 4.8 (2.2) 13 (330) 3-1/8 (79) 51476 .7 (522) 0-3,100 6 (152) 80 dB(A) 41 (1,161) 3/8 (10) 1/4" NPT 5/8"-11 Male 4.8 (2.2) 13 (330) 3-1/8 (79) 51479 .7 (522) 0-2,000 6 (152) 81 dB(A) 43 (1,218) 3/8 (10) 1/4" NPT 5/8"-11 Male 4.8 (2.2) 13 (330) 3-1/8 (79) 51602 .7 (522) 0-2,000 6 (152) 82 dB(A) 43 (1,218) 3/8 (10) 1/4" NPT M14 Male 4.8 (2.2) 13 (330) 3-1/8 (79) 51603 .7 (522) 0-3,100 6 (152) 80 dB(A) 41 (1,161) 3/8 (10) 1/4" NPT M14 Male 4.8 (2.2) 13 (330) 3-1/8 (79) 51604 .7 (522) 0-2,000 6 (152) 82 dB(A) 43 (1,218) 3/8 (10) 1/4" NPT M14 Male 4.8 (2.2) 13 (330) 3-1/8 (79) 51605 .7 (522) 0-3,100 6 (152) 80 dB(A) 41 (1,161) 3/8 (10) 1/4" NPT M14 Male 4.8 (2.2) 13 (330) 3-1/8 (79) Tune-Up Kit: No. 96178 • Additional Specifications: Air Pressure 90 PSIG (6.2 Bar) 86
316 Sidor | Gäller till 07/2026 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.