Dynabrade - Industrial Katalog Sida 120
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Dynabuffer BACKUP PADS PAGE 241 ACCESSORIES Air-Powered Buffing Tool, 3" and 5" Diameter Ideal for use in Dynabrade “Two-Step” System PAGE 233 FOR POLISHING BUFFS (see page 119) 3" (76 mm) and 5" (127 mm) diameters SEE PAGE 248 Model 57126 3" Diameter, Rear Exhaust • Dynabuffer moves backup pad and optional polishing buff in 14 mm diameter offset orbit. • Runs at 10,000 RPM free speed; 7,000 RPM under load. • Patented balancer compensates for vibration when running under load, resulting in a smooth operating performance. (Patent 6,206,771). Applies to all models on page. Model 57126 • Optimum air pressure for this model is 80 PSIG. • Includes 56142 Hook-Face backup pad. Polishing Buff Sold Separately • Safety-lock throttle lever is optional. Model 55126 3" Diameter, Front Exhaust • Offers increased horsepower and speed, to reduce buffing time by up to 40%. • Runs at 12,000 RPM free speed; 7,500 RPM under load. • Front exhaust (patent pending) helps to cool foam buffing pad (optional), increasing life of pad. Model 55126 • Rubber grip adds comfort and helps protect operator from cold air transfer. • Safety-lock throttle lever included. BUFFING TOOLS • Optimum air pressure for this model is 80 PSIG. Polishing Buff Sold Separately • Includes 56142 Hook-Face backup pad. Model 58455 5" Diameter, Rear Exhaust • Large diameter allows buffing of wider area in less time. • Runs at 10,000 RPM free speed; 5,500 RPM under load. • Shown with optional 56195 Hook-Face Random Orbital Sanding Pad, and optional polishing pad. Model 58455 • Optimum air pressure for this model is 90 PSIG. For most efficient polishing, place approximately 10 lbs. of pressure on pad while Dynabuffer is in use. • Safety-lock throttle lever included. To prevent “slinging”of the polishing compound, keep Dynabuffer ON the work surface as you stop the tool. 14 mm Dia. Random Orbital Motion Backup Pad and Polishing Buff Sold Separately (All models on page) Model Number Motor hp (W) Motor RPM Sound Level Maximum Air Flow SCFM (L/Min) Hose I.D. Size Inch (mm) Air Pressure PSIG (Bar) Tool Thread Weight Pound (kg) Length Inch (mm) Height Inch (mm) 55126 .5 (373) 7,500 79 dB(A) 37 (1,048) 1/4 (8) 80 (5.5) 5/16"-24 Female 2.7 (1.2) 9-1/2 (241) 4-1/8 (105) 57126 .16 (119) 7,000 74 dB(A) 20 (566) 3/8 (10) 80 (5.5) 5/16"-24 Female 2.0 (0.9) 8-1/4 (210) 3-1/8 (80) 58455 .21 (157) 5,500 82 dB(A) 16 (453) 1/4 (8) 90 (6.2) 5/16"-24 Female 2.7 (1.2) 11 (277) 4-15/16 (125) Tune-Up Kit: 55126 – No. 96542; 57126 – No. 96537; 58455 – No. 98220 • Additional Specifications: Air Inlet Thread 1/4" NPT 120
316 Sidor | Gäller till 07/2026 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.