BLICKLE - wheels and castors Sida 606
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Special systems and solutions Truck locks and jacks FF 100-1 + FF 125-1 Truck locks FF 125 ̵ FF 200 Truck locks keep transport equipment in a resting position. They are attached directly to the transport equipment. Operating the pedal takes some of the load off the transport equipment without raising it up. When operated, the truck lock deflects by approximately 10 mm. The maximum surface contact pressure in combination with suitable swivel and fixed castors amounts to approx. 60 kg. The following truck lock with a plate size of 100 x 85 mm can be combined with the LE, L and LK castor series. The truck locks with a plate size of 140 x 110 mm can be combined with the LK (wheel Ø 125x50-200 mm) LH, LO and LS castor series. Other versions are available upon request. Zinc-plated, blue-passivated, Cr6-free. Product code Total height Total height unactuated actuated, Bolt hole Bolt hole spacing diameter [mm] [mm] [mm] 100 x 85 100 x 85 140 x 110 140 x 110 140 x 110 140 x 110 80 x 60 80 x 60 105 x 75-80 105 x 75-80 105 x 75-80 105 x 75-80 Plate size (H0) [mm] (H1) [mm] 108 133 142 170 175 217 138 163 180 208 213 255 9 9 12.3 12.3 12.3 12.3 H1 FF 100-1 FF 125-1 FF 125 FF 150 FF 160 FF 200 H0 extended Jacks Product code WH 160 WH 200 WH 250 Total height Total height unactuated actuated (H0) [mm] (H1) [mm] 166 207 257 209 250 300 Bolt hole Bolt spacing hole Ø [mm] [mm] [mm] 140 x 110 140 x 110 140 x 110 105 x 75-80 105 x 75-80 105 x 75-80 12.3 12.3 12.3 Plate size H0 H1 Jacks are used to raise transport equipment up in their resting position. They are attached directly to the transport equipment. Actuating the pedal raises the transport equipment up. Jacks can be combined with a wide range of castor series. Jacks perform at their best when the total height of the actuated jack (H1) exceeds the total height of the fixed and swivel castors by 5 mm. Depending on the weight of the operator, they can provide a lifting force of between 150 kg and 250 kg. The vertical load on the jack must not exceed 500 kg when raised. Zinc-plated, blue-passivated, Cr6-free. 18 606 we innovate mobility www.blickle.com
636 Sidor | Gäller till 12/2023 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.