BISON Hauptkatalog Spanntechnik Sida 252
Kommersiell Kunderbjudande **Toppförsäljare från BISON
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
Admissible revolutions of the chuck depend on many factors, such as cutting parameters, weight of the workpiece and its balance or type of machining (interrupted or continuous turning) etc. The max. speeds as indicated in the table below should not cause a decrease of the clamping force to the half of its initial value. When machining in the stable conditions (machining material, tools, working conditions), the clamping force may be reduced by up to 67% of its initial value. This relates to the chuck equipped with standard jaws, that do not protrude beyond the outer diameter of the chuck and the unbalance condition of the ‘chuck-machining workpiece’ is maintained (not exceeding 20gmm/kg). The chuck and jaws must be in good condition. Otherwise, refer to the calculations as indicated in the PN-M-60650. 43** 4505, 4605, 4705, 4805 Max. U/min Max. U/min Max. rpm Futtergröße [mm] Max. rpm hlkörper Gusskörper el body Cast iron body 7.640 - 7.190 - 6.120 - 4.890 - 4.370 - 3.820 - 3.060 1.800 2.450 1.500 1.940 1.200 1.530 860 1.220 690 970 550 760 430 610 340 490 280 440 250 380 220 340 190 300 170 Chuck size [mm] 4505 4605 4705 4805 200 250 315 400 500 630 800 1000 1250 2.500 2.000 1.500 1.000 700 540 420 280 210 2.000 1.800 1.200 800 600 480 360 240 170 3.000 2.500 2.000 1.500 1.000 750 600 380 - 2.500 2.000 1.700 1.300 800 660 520 330 - 34** Futtergröße [mm] Max. U/min Chuck size [mm] Max. rpm 125 160 200 250 315 400 500 630 800 915 1000 1250 6.000 5.400 4.600 4.200 3.300 2.400 1.500 1.200 960 840 720 600 www.bison-chuck.de • e-mail: [email protected] • www.bison-chuck.com • e-mail: [email protected]
260 Sidor | Gäller till 12/2026 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
