BGS technic Main catalog Sida 629
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
201 /20 Adjustment & O-Ring Mounting Tool Set for VAG Pump-Nozzle Unit • allows precise positioning of the pump /nozzle unit and a damage-free installation of the O-rings • not correctly installed pump/nozzle units present a risk of damage to the cylinder head and the pump/nozzle unit suitable for following VAG Pump/Nozzle engines: • 5 cyl. & 10-cyl. VW Phaeton, Touareg as of 2003, T5 as of 2004, etc. • 4 cyl. VW Golf, Touareg, Audi A3 from 2004, etc. • setting gauge, steel made, to be used as OEM T10210 • O-ring mounting sleeve, brass made, to be used as OEM T10056/1 • O-ring mounting sleeve, brass made, to be used as OEM T10056/2 • O-ring mounting sleeve, brass made, to be used as OEM T10056/3 • O-ring mounting sleeve, brass made, to be used as OEM T10164/1 • O-ring mounting sleeve, brass made, to be used as OEM T10164/2 Engine & Attachments Item # 8954 FSI Nozzle Assembly/Disassembly Set • suitable for VW, Audi, Seat, Skoda with direct injection engines and engines with pump-injector units • to be used as OEM tool kit T10133 + T10163 • puller for dismantling FSI injectors, use as T10133/1 • puller claw for dismantling FSI injectors, use as T10133/2 • sliding hammer, use as T10133/3 • cone for mounting the combustion chamber rings use as T10133/53 • calibration tools for mounting the combustion chamber rings, use as T10133/6, T10133/7, T10133/8 • built-in pin for mounting the FSI injectors, to be used as T10133/9 • extractor for dismantling pump-injector units Item # 68345 Injector Removal Tool | for Air Hammers • for disassembly of hard to remove injectors • special construction with pulling rod and sliding clamp for extracting injectors with air hammers • suitable for pneumatic hammer BGS 3515, injector dismantling claw from BGS 7777 and separate claws 7777-1, 7777-2, 7777-3 • material: S45C / Cr-Mo steel • overall length: 510 mm • handle length: 110 mm Item # 9308 608
994 Sidor | Gäller till 12/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
