BGS technic Main catalog Sida 622
Kommersiell Kunderbjudande **Produkter från katalogsidan
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
201 /2 Injector Removal Hook & Adaptor Set Item # 9457 Injector Removal Kit | 6 pcs. • for pulling out stuck common rail injectors • adaptor inside thread M20 x 1.5 to inside thread M14 x 1.5 • adaptor inside thread M20 x 1.5 to external screw thread M17 x 1.0 • adaptor inside thread M20 x 1.5 to external screw thread M20 x 1.0 • adaptor inside thread M20 x 1.5 to external screw thread M25 x 1.0 • adaptor inside thread M20 x 1.5 to external screw thread M27 x 1.0 • 10 mm internal hexagon bit socket with hole for retaining ring of injector needle Item # 7771 7771-1 7771-6 7771-2 7771-3 7771-4 7771-5 Engine & Attachments • for easier removal of stubborn injectors with a sliding hammer • suitable for e. g., Common Rail injectors in the following vehicles: • Citroen C5 / Jumpy / Xsara, Opel, Renault F9Q • Fiat Ducato JTD • Peugeot 206 / 307 / 406 / Boxer (2.0 / 2.2 / 2.3 HDI) • Mercedes-Benz CDI (not A-class / Sprinter / Vito) • 4 adaptors for attaching to the external injector thread • inner thread M25x0.50 to inner thread M18x1.5 • inner thread M25x0.75 to inner thread M18x1.5 • inner thread M27x1.00 to inner thread M18x1.5 • inner thread M16x1.50 to inner thread M18x1.5 • 4 hooks for attaching to the injector body, claw width: 12 / 13,5 / 16 / 26 mm inner thread M18x1.5 for connecting a sliding hammer • 1 sliding hammer adaptor, inner thread M20x1.5 to outer thread M18x1.5 for attaching the dismantling hooks & adaptors to BGS sliding hammers (BGS 7772, 7772-2, 7776) Description Injector Removal Kit | 6 pcs. Thread Adaptor M20 x 1.5 | for BGS 7772 Disassembly Adaptor from BGS 7771 | M14 x M20 x 39 mm Disassembly Adaptor from BGS 7771 | M17 x M20 x 52 mm Disassembly Adaptor from BGS 7771 | M20 x M20 x 49 mm Disassembly Adaptor from BGS 7771 | M25 x M20 x 41 mm Disassembly Adaptor from BGS 7771 | M27 x M20 x 41 mm Injector Socket | 12.5 mm (1/2") Drive | Internal Hexagon 10 mm • for loosening of the retaining ring of injectors • is needed for injector disassembly • with 7.5 mm bore Item # 4478 601
994 Sidor | Gäller till 12/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
