AMF Catalogue ZERO-POINT SYSTEMS Sida 50
Kommersiell Kunderbjudande **Toppförsäljare från AMF Spannsysteme
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
automation solutions of amf No. 6171LA-10-08 Clamping module, flange version Pneumatic opening. Pneumatic blow-out. Operating pressure for opening: min. 5 bar - max. 12 bar. Cover and piston hardened. Flange housing: stainless steel. Repetition accuracy < 0.005 mm. With locking control (pneum.), opening control (pneum.) and support control (pneum.) Order no. 564599 Size Module installed KP10.3 6108LA-10-08 Blow out [kN] Holding force* [kN] 10 25 ● Pull-in/locking force up to Weight [Kg] 3,4 Application: Zero-point clamping system for automation solutions for set-up-time-optimised clamping during cutting and non-cutting machining. The pneumatic supply lines can be connected to the side or base using M5 threads. Moreover, the air can be supplied via the floor using the O-rings supplied as standard. The clamping module can be mounted on a plate using the 6210-15-01 centring sleeve or recessed at 3 different depths. Note: Locking control: Dynamic pressure with locked clamping modules, flow-through with opened clamping module. Opening control: Dynamic pressure with opened clamping modules, flow-through with locked clamping module. Support control: static pressure with supported interchangeable pallet, flow-through when no interchangeable pallet is in place. The installation clamping module is opened pneumatically (1) and locked mechanically by spring force. Subsequent uncoupling of the pressure line is possible at any time (module is clamped at normal pressure). ! new The flange has five useable connections: 1 = Pneum. opening 3 = Pneum. blow-out and pneum. support control 4= Pneum. opening control 5 = Vent 8 = Pneum. locking control * Please observe the installation instructions. On request: - Installation drawing Dimensions: Order no. 564599 Size dia. D dia. D1 dia. D2 ØD3 H7 dia. DN H1 H2 H3 H4 HA K1 K2 dia. LK M KP10.3 112 111 112 15 22 5 16,5 32 40 50 22 27 88 M6 Subject to technical alterations. 50 ZERO-POINT-SYSTEMS ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
228 Sidor | Gäller till 12/2025 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
