AMF Catalogue magnetic clamping systems Sida 7
Kommersiell Kunderbjudande **Toppförsäljare från AMF Spannsysteme
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
do Magnetic Fields present any haZards? magnetic field height 0 to 100 mm: in this area, cardiac pacemakers, wristwatches and bank cards may be damaged. at magnetic field height 100 mm and greater there is no longer any health risk. caution! Do not put any workpieces on while the magnet is actively clamped. – risk of injury! up to hoW Many degrees celsius can Magnetic taBles Be used? the magnetic tables can be used at operating temperatures up to 100°c. the neodymium magnet is guaranteed for a maximum temperature of 100°c (this refers to the temperature in contact with the surface of the magnetic table over a longer time period). as a result of large temperature fluctuations, in some cases „magnetic edges“ may occur, which disappear again when the temperature is again within the guaranteed parameters. A tAilored solution Each pair of n/S poles generates an autonomous and defined force which is not influenced by the operating conditions of the other adjacent poles. therefore by counting the number of poles occupied by the clamped piece it is possible to predetermine the force generated and consequently to establish the usable machine power with the relative machining parameters. 1) stoCk reMovAl Curve / surFACe Condition (WorkPiEcE on magnEtic clamPing PlatE) 100 90 Q max. [%] 80 70 60 50 40 a = milled 30 B = rough-sized 20 c = stamped / rolled 10 D = shell casting Workpiece t = air gap E = sand casting 0 0,05 0,1 0,15 0,2 0,25 a B c D E 0,3 0,35 0,4 0,45 magnetic clamping plate 0,5 t [mm] 2) Curve For stoCk reMovAl / extensions height (WorkPiEcE on PolE EXtEnSionS) 100 90 Q max. [%] 80 70 60 Workpiece 50 40 30 h = height of the fixed or movable pole extensions 20 10 0 20 40 60 80 100 magnetic clamping plate h [mm] Subject to technical alterations. ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de Magnetic claMping systeMs 7
20 Sidor | Gäller till 12/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
