AMF Catalogue magnetic clamping systems Sida 14
Kommersiell Kunderbjudande **Toppförsäljare från AMF Spannsysteme
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
pole extensions optimal adaptation to the workpiece surface contour is guaranteed by the movable pole extensions. these pole extensions adapt themselves to the workpiece surface. the workpiece is supported and rests securely on the pole extensions. optimal machining is possible from 5 sides without any interference contours. No. 2975PF-50 Pole extension, fixed Order no. 550745 Size 50 dia. D H Weight [mm] [mm] [g] 49 30 438 Application: Fixed pole extensions are attached directly to the poles of the magnetic clamping plate with an M8 screw. Pre-processed or flat workpieces can be placed directly on the fixed pole extensions and clamped. If the workpiece has uneven surfaces, it is usually placed on 3 fixed pole extensions and clamped (three-point bearing). Movable pole extensions, which adapt flexibly to the workpiece contours, are fastened onto all other poles. Features: The pole extensions are designed for the optimum magnetic flux through the pole extension into the workpiece. The M8 fastening screw is supplied as standard. Advantage: - Easy and quick installation - Optimum power flux of the magnetic field lines - Strong holding forces No. 2975PFD-50 Pole extension with friction coefficient increase, fixed Order no. 566550 Size 50 dia. D H Weight [mm] [mm] [g] 49 30 440 Application: ! new Fixed pole extensions are attached directly to the poles of the magnetic clamping plate with an M8 screw. Pre-processed or flat workpieces can be placed directly on the fixed pole extensions and clamped. If the workpiece has uneven surfaces, it is usually placed on 3 fixed pole extensions and clamped (three-point bearing). Movable pole extensions, which adapt flexibly to the workpiece contours, are fastened onto all other poles. Features: The pole extensions with increased friction coefficient can be used in many ways. With up to 250% higher shear force load, the specially coated pole extension works well in many areas of use. The M8 fastening screw is supplied as standard. Advantage: - Easy and fast installation - Very high shear force load possible, even without stops Note: A combination of fixed pole extensions with (556550) and without increased friction coefficient (550745) is not possible. Subject to technical alterations. 14 Magnetic claMping systeMs ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
20 Sidor | Gäller till 12/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
