ALFRA Catalog Control Cabinet and Control Engineering Sida 108
Kommersiell Kunderbjudande **Toppförsäljare från ALFRA
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
exkl. Frakt
TCT TOOLS – TECHNICAL TERMS Clearance angle is the angle between the carbide teeth and the material to be machined. ALFRA TCT core drills have several clearance angles on a cutting edge. Cutting depth is the maximum material thickness that can be machined with the respective tool (should not be confused with the construction height of the tool). Chip flute gathers up the chips generated or removes these from the borehole. Chip breaker directs the chips from the carbide tooth into the chip flute. Cutting face the chip is formed on this surface. Angle of rake is the angle between the tool axis and the cutting face. Tooth projection is the carbide projection to the core. Tooth height difference is used for the chip splitting. Speed, cutting speed and feed rate (typical values) Rotabest®- TCT hole cutters Not suitable for automatic feed Material Construction steel 50 kp/m2 Steel 50-70 kp/m2 Stainless steel Cast iron Non-ferrous metals, aluminium Exotic alloys m/min 40-60 30-50 18-45 65-95 100-550 10-30 mm/r 0.08-0.12 0.08-0.12 0.8-0.10 0.12-0.20 0.22-0.45 0.05-0.08 Accuracy (reference value) / Input / + 0.10 mm Output /± 0 mm 108
116 Sidor | Gäller till 12/2024 | Previous page | Nästa sida
Välj ditt språk
Juridiska frågor
Tillverkaren ansvarar exklusivt för innehållet, priset och artikeldetaljerna för produkterna och erbjudanden som presenteras i katalogerna. Med förbehåll för tekniska och optiska ändringar av tillverkaren och undantag för fel.
Formulär för specialprodukter
ToolTeam® upphandlingstjänst
Letar du efter produkter som visas i katalogen men inte kan köpas direkt online?Vår upphandlingstjänst kommer med glädje att ge dig ett icke-bindande och individuellt erbjudande.
