Foam abrasives

(118)

Foam abrasives are flexible sanding bodies that are characterized by their adaptability to uneven surfaces. The assortment from KA.EF. Schleifmittel includes various grit levels for manual pre-sanding and fine sanding.

113050S
1,05 €
exkl. Frakt
Detaljer 12 Variants
50060050
1,15 €
exkl. Frakt
Detaljer 8 Variants
-15% KA.EF. Schleifmittel KA.EF.  Schleifschwamm 98x87x26mm 1seitig schräg fein AO100 = P 220 764230SCH
764230SCH
1,45 €
exkl. Frakt
1,70 € Rekommenderat försäljningspris
Detaljer 5 Variants
-27% KA.EF. Schleifmittel KA.EF.  Jumboschleifschwamm grob AO036 = P 80 7853
7853
1,75 €
exkl. Frakt
2,39 € Rekommenderat försäljningspris
Detaljer 7 Variants
-4% KA.EF. Schleifmittel KA.EF.  SoftPad offener PU M medium Korn AO060 = P 150  165317
165317
1,20 €
exkl. Frakt
1,25 € Rekommenderat försäljningspris
Detaljer 4 Variants
 

What are foam abrasives suitable for?

Foam abrasives are suitable for manual sanding where uniform material removal and good accessibility to contours are important. The flexible foam base allows them to adapt to the geometry of the workpiece, which is advantageous when machining surfaces with slight irregularities.

How does the grit differ?

The grit determines the aggressiveness of the abrasive. Coarse grits are used for rapid material removal, while finer grits are used for smoothing and preparing the surface for subsequent work steps. The choice of grit depends on the desired degree of machining and the initial condition of the workpiece.

Which formats are available?

The assortment includes both individual sanding sponges and variants with two different grits on one side. These combinations can facilitate switching between coarse and fine sanding.

Populära märken