Rothoblaas - Wood screws and connectors Página 320
Oferta para clientes comerciais**Vendedores mais populares de RothoBlaas Deutschland
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
JFA INSTALLATION WITH ADJUSTMENT FROM BELOW 01 Trace the joist midline, indicating the position of the holes and then pre-drill a 10 mm diameter hole. 02 03 The depth of the pre-drill depends on the assembly height R and must be at least 16 mm (bushing size). 04 Use a hammer to insert the bushing. Screw the support into the bushing and turn the joist. Detail of adjustment from below. Follow the course of the ground by acting independently on the individual supports. H 05 Place the joist on the substrate, parallel to the one previously laid. 06 Adjust the height of the support from the bottom using a 10 mm SW wrench. JFA INSTALLATION WITH ADJUSTMENT FROM ABOVE 01 Trace the joist midline, indicating the position of the holes and then pre-drill a 10 mm diameter through hole. 02 03 We recommend a maximum of 60 cm between supports, to be checked according to depending on the load. 04 Use a hammer to insert the bushing. Screw the support into the bushing and turn the joist. Detail of adjustment from above. Follow the course of the ground by acting independently on the individual supports. H 05 Place the joist on the substrate, parallel to the one previously laid. 320 | JFA | OUTDOOR 06 Adjust the height of the support from above using a flat screwdriver.
369 Páginas | Válido até 04/2024 | Página anterior | Próxima página
Escolha a sua língua
Questões legais
O fabricante é exclusivamente responsável pelo conteúdo, pelo preço e pelos detalhes dos produtos e das ofertas apresentados nos catálogos. Sujeito a alterações técnicas e ópticas por parte do fabricante e com excepção de erros.
Formulário de pedido de produtos especiais
O serviço de aquisições de ToolTeam®
Está à procura de produtos que são mostrados no catálogo mas que não podem ser comprados diretamente online?O nosso serviço de aprovisionamento terá todo o prazer em fazer-lhe uma oferta individual e não vinculativa.
