Pneumax - Hauptkatalog Página 806
Oferta para clientes comerciais**Vendedores mais populares de Pneumax GmbH
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
Microbore cylinders according to standard ISO 6432 Series 1200 TECNO-MIR Series 1200, TECNO-MIR Construction characteristic End caps nylon 66 reinforced with glass fibres Barrel nylon 66 reinforced with glass fibres Piston rod C43 Chromed (non magnetic piston version) stainless steel (magnetic piston version) Piston aluminium Seal NBR oil-resistant rubber seal Piston rod seal PUR Mounting steel painted / stainless steel AISI 304 Forks zinc plated steel / stainless steel AISI 304 Operational characteristics Pneumatic actuatiOn 3 Fluid Filtered air. No lubrication needed, if applied it shall be continuous. Maximum working pressure 8 bar Working temperature -5°C - +50°C Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device) •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Our Technical Department will be glad to help. Standard strokes Double acting version Ø12 : 15 - 25 - 50 - 75 - 80 - 100 - 125 - 150 - 160 - 200 mm Ø16 : 15 - 25 - 50 - 75 - 80 - 100 - 125 - 150 - 160 - 200 - 250 mm Ø20 - Ø25 : 15 - 25 - 50 - 75 - 80 - 100 - 125 - 150 - 160 - 200 - 250 - 300 mm On request are available strokes up to: Ø12 : 200 mm Ø16 : 250 mm Ø20 - Ø25: 300 mm Maximum tightening torque for fittings Bore Thread Maximum torque (Nm) Ø 12 Ø 16 Ø 20 Ø 25 M5 M5 G 1/8” G 1/8” 1 1 4 4 WEIGHT TABLE SERIES TECNO MIR 1232 WEIGHT TABLE SERIES TECNO MIR 1230 - 1231 Bore WEIGHT g storke 0 Ø12 Ø16 50 gr. every 10mm 3,75 gr. 3 | 10 Ø20 Ø25 65 gr. 120 gr. 160 gr. 4 gr. 6,5 gr. 9 gr. Ø12 Ø16 Ø20 Ø25 stroke 0 60 gr. 75 gr. 180 gr. 200 gr. every 10mm 7 gr. 8,5 gr. 10 gr. 20 gr. Bore WEIGHT g Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
1106 Páginas | Válido até 06/2025 | Página anterior | Próxima página
Escolha a sua língua
Questões legais
O fabricante é exclusivamente responsável pelo conteúdo, pelo preço e pelos detalhes dos produtos e das ofertas apresentados nos catálogos. Sujeito a alterações técnicas e ópticas por parte do fabricante e com excepção de erros.
Formulário de pedido de produtos especiais
O serviço de aquisições de ToolTeam®
Está à procura de produtos que são mostrados no catálogo mas que não podem ser comprados diretamente online?O nosso serviço de aprovisionamento terá todo o prazer em fazer-lhe uma oferta individual e não vinculativa.
