PFERD Tools Main Catalogue Página 97
Oferta para clientes comerciais**Vendedores mais populares de PFERD
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
TC burrs PFERD TOOLS cuts INOX cut ■ Extremely high stock removal rate on all austenitic, rust and acid-resistant steels, stainless steel (INOX) and soft titanium alloys (tensile strength < 500 N/mm²). ■ Significantly reduced vibration and less noise. ■ Burrs with HICOAT coating HC-STS demonstrate high hardness and wear resistance in comparison with uncoated burrs. 2 ALU cut ■ High stock removal rate on aluminium and aluminium alloys, non-ferrous metals and plastics. ■ Smooth milling. ■ High-quality HICOAT coating HC-NFE for long-chipping and smearing aluminium alloys and non-ferrous metals. ■ Can be used with cutting speeds of up to 1,100 m/min (HC-NFE: up to 1,300 m/min). NON-FERROUS cut ■ High stock removal rate on non-ferrous metals, brass, copper, plastics and fibrereinforced plastics. ■ Suitable for universal use. CAST cut ■ Extremely high stock removal rate on cast iron. ■ Smooth milling. ■ Reduced vibration and less noise. TITANIUM cut ■ Outstanding stock removal rate and tool life on hard titanium alloys. ■ Tangibly more aggressive, large chips and very good chip removal. ■ Reduced vibration and less noise. ■ For soft titanium alloys (tensile strength < 500 N/mm²), PFERD TOOLS recommends the INOX cut. EDGE cut ■ Creates exact edge shapes – with either 30° or 45° chamfering or a defined radius of 3.0 mm. ■ Safe and comfortable to guide. PLAST cut ■ Trimming and contour milling of workpieces made from less hard glass and carbon-fibre-reinforced duroplastics (GRP and CRP with ≤ 40 % fibre content) and fibre-reinforced thermoplastics. ■ Minimized delamination and fraying through straight cut. ■ Highly suitable for use on machines and on robots. ■ Reduced vibration and less noise. FVK cut ■ Trimming and contour milling of workpieces made from hard glass and carbon-fibre-reinforced duroplastics (also GRP and CRP > 40 %). FVKS cut ■ Similar to the FVK cut. ■ Smooth milling. ■ Generates smooth cut edges. ■ For use on machines and robots with high feed rates. TOUGH cut ■ High stock removal rate on cast iron, steel < 54 HRC. ■ Extremely resistant to impacts. ■ Also suitable for use with high surface contact angles > 1/3 and under impact loads. TOUGH-S cut ■ High stock removal rate on cast iron, steel < 54 HRC. ■ Similar to the TOUGH cut, but with smoother milling and shorter chips. ■ Extremely resistant to impacts. ■ Also suitable for use with high surface contact angles > 1/3 and under impact loads. MICRO cut ■ Good stock removal on almost all materials < 68 HRC. ■ High surface quality. ■ Reduced vibration and less noise. ■ Burrs with HICOAT coating HC-FEP for high hardness and wear resistance. Note ■ On tungsten carbide burrs designed for high-performance applications, blue discolouration cannot be avoided on account of the very high stock removal rate. However, this does not constitute a safety risk. 8|2 Catalogue
853 Páginas | Válido até 12/2026 | Página anterior | Próxima página
Escolha a sua língua
Questões legais
O fabricante é exclusivamente responsável pelo conteúdo, pelo preço e pelos detalhes dos produtos e das ofertas apresentados nos catálogos. Sujeito a alterações técnicas e ópticas por parte do fabricante e com excepção de erros.
Formulário de pedido de produtos especiais
O serviço de aquisições de ToolTeam®
Está à procura de produtos que são mostrados no catálogo mas que não podem ser comprados diretamente online?O nosso serviço de aprovisionamento terá todo o prazer em fazer-lhe uma oferta individual e não vinculativa.