Kukko puller guide Página 3
Oferta para clientes comerciais**Vendedores mais populares de Kukko
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
KUKKO-Technologies KUKKO-Safety instructions Precautionary Notes and Helpful Hints All tools must always be used for the intended purposes under the envisioned conditions and within their postulated limitations. Check the condition of your tools at regular intervals, and replace any damaged or worn parts. A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench. General General The geometry of the cross-beam and sliding parts has been optimized to ensure particularly easy movement of the extractor jaws along the cross-beam. > 3>mm Keep the threads of all pressure spindle and cross-beam clean and well oiled. (KUKKO special sliding grease for pressure spindle Art. 699999) KUKKO – Eine Welt The cross-hooks guarantee maximum stability due to the mounting of the puller jaws in the sliding part. KUKKO on in Bewegung seit 1919! Before you start work, acquaint yourself with the proper use of the tool or tools in question, with due attention to pertinent safety measures. Facebook www.facebook.com/ku kkotools If anything at all is unclear about any of the above, it is best to call the factory for some firsthand advice. The operating nut is easy to turn thanks to a built in pressure bearing. Resistance from friction is reduced to a minimum. O.K. > 3 mm 90° Prior to starting work, make sure that the pulling tool is in good working order. Double-check the tool for correct mounting, and monitor the forces incidental to the pulling process. Never violate the maximum load data prescribed for the tool in question. Use a torque wrench (for mechanical/pressure-screw-driven tools) or a pressure gauge (hydraulic/pump-driven tools) to keep tabs on the applied forces. Smooth-running, self-adjusting springback jaws. Always wear suitable personal protective equipment, including protective goggles. Automatic tensioning and centering of the extractor jaws. Always wrap the pulling tool and the workpiece in a protective blanket as a precaution against the potential effects of sudden release. If the tool appears to be overloaded, works sluggishly, or is otherwise negatively conspicuous, interrupt the pulling process, and replace the tool with a larger model. By turning the locking bolt the jaws are centered and tensioned and therefore firmly grip the piece to be pulled off. This prevents the jaws moving or slipping off. Never use an electric- or pneumatic-powered impact/hammer drill for driving a pulling tool. Never use extensions to increase the applied torque. Tools with hydraulic function. Never alter a pulling tool or related product in any way. Unique, simple pullback of the nut splitter chisel to remove it from deformed or split nuts. The chisel does not get stuck in the nut. 4 Since heat detracts from the thermal properties of steel, and since some parts require heating to facilitate their removal, remember to never heat the pulling tool along with the part. www.KUKKO.com www.KUKKO.com 5
17 Páginas | Válido até 12/2020 | Página anterior | Próxima página
Escolha a sua língua
Questões legais
O fabricante é exclusivamente responsável pelo conteúdo, pelo preço e pelos detalhes dos produtos e das ofertas apresentados nos catálogos. Sujeito a alterações técnicas e ópticas por parte do fabricante e com excepção de erros.
Formulário de pedido de produtos especiais
O serviço de aquisições de ToolTeam®
Está à procura de produtos que são mostrados no catálogo mas que não podem ser comprados diretamente online?O nosso serviço de aprovisionamento terá todo o prazer em fazer-lhe uma oferta individual e não vinculativa.