Hymer - Climbing Ladders Página 9
Oferta para clientes comerciais**Vendedores mais populares de HYMER
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
DIN 14094-1 ESCAPE LADDER / FIRE ESCAPE / ESCAPE ROUTE Continuous fall protection on request · From an access height of 10,000 mm, the ladder must be · · installed with offset. The max. length of a ladder section must not exceed 6,000 mm. The top rung must be at the exit level. The offsets are to be positioned at equal intervals, but can also be planned at different heights using the online configurator. The distance from the rung-leading-edge to the wall must be at least 150 mm. Exit: The gap between the vertical ladder and the exit level must not exceed 75 mm. For a standard wall distance between ladder and building of 210 mm, this gap is provided by using an exit step. Fastening: The standard wall mounting has a gap of 210 mm from the stile axis to the building. The distance between the individual fastening points must not exceed 2,000 mm. They should preferably be attached directly below the rungs. · · Safety cage: · Distance from the lowest safety cage clamp to the floor: 2,200 mm to 3,000 mm. · Safety cage required from a height of 3,000 mm. 9
40 Páginas | Válido até 12/2025 | Página anterior | Próxima página
Escolha a sua língua
Questões legais
O fabricante é exclusivamente responsável pelo conteúdo, pelo preço e pelos detalhes dos produtos e das ofertas apresentados nos catálogos. Sujeito a alterações técnicas e ópticas por parte do fabricante e com excepção de erros.
Formulário de pedido de produtos especiais
O serviço de aquisições de ToolTeam®
Está à procura de produtos que são mostrados no catálogo mas que não podem ser comprados diretamente online?O nosso serviço de aprovisionamento terá todo o prazer em fazer-lhe uma oferta individual e não vinculativa.
