BLICKLE - wheels and castors Página 77
Oferta para clientes comerciais**Vendedores mais populares de Blickle
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
excl. o transporte
Wheels and castors guide Blickle wheel series Hub fitting wheels Series PA VLEA Wheel Ø 400–536 mm 405–525 mm 250–620 mm 200–400 mm Load capacity 250–1,300 kg 950–1,885 kg 630–4,540 kg 700–2,500 kg Tread / tyre pneumatic tyre, ribbed or zig-zag profile, 2 to 10 ply rating, colour black (see page 54 for a material description) super-elastic solid rubber, 3-component tyre, highly-elastic cushion layer, abrasion-resistant tread, colour black (see page 54 for a material description) high-quality elastic solid rubber in smooth rolling quality, colour black (see page 53 for a material description) high-quality polyurethane elastomer Blickle Softhane®, colour green (see page 55 for a material description) Wheel centre / rim pressed steel, with central hole, fixing holes are counter-sunk for installation on standard hub flanges, zinc-plated, blue-passivated, Cr6-free or lacquered, silver colour heavy pressed steel, bolted (flat base rim), with central hole, fixing holes are counter-sunk for installation on standard hub flanges, zinc-plated, blue-passivated, Cr6-free rugged grey cast iron, with central hole, fixing holes are counter-sunk for installation on standard hub flanges, lacquered, colour anthracite rugged grey cast iron, with central hole, fixing holes are counter-sunk for installation on standard hub flanges, lacquered, colour silver Connection tread / tyre with wheel centre / rim tyre mounted on rim steel-wire reinforced tyre, mounted on rim steel-wire reinforced tyre, pressed-on cast tread Tread & tyre hardness Floor preservation / smooth operation Rolling resistance Wear resistance GEVA GSTA 60 Shore A 70 Shore A 65 Shore A 75 Shore A excellent very good very good very good good good very good very good satisfactory good satisfactory very good Non-marking – optional – Temperature resistance -30 °C to +50 °C -30 °C to +80 °C temporarily up to +100 °C -30 °C to +80 °C temporarily up to +100 °C -30 °C to +70 °C temporarily up to +90 °C Bearing types (refer to page 84–85) hub fitting hub fitting hub fitting hub fitting • non-marking, grey tyre (-SG) • antistatic, black tyre (-AS) • drive wheel with hub keyway (see series VLEN) • pressed-on steel band in drive quality (-STA) • antistatic, non-marking, grey (-AS) Options Additional considerations • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity • wheel width and diameter can change during operation • the load capacity reduces at ambient temperatures above +60 °C • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity • wheel width and diameter can change during operation • puncture-proof and maintenance-free • the load capacity reduces at ambient temperatures above +60 °C • wheel centre is approximately 4 mm wider than the specified wheel width • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity • the load capacity reduces at ambient temperatures above +40 °C • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity Page 548 549 550 551 www.blickle.com we innovate mobility 77
636 Páginas | Válido até 12/2023 | Página anterior | Próxima página
Escolha a sua língua
Questões legais
O fabricante é exclusivamente responsável pelo conteúdo, pelo preço e pelos detalhes dos produtos e das ofertas apresentados nos catálogos. Sujeito a alterações técnicas e ópticas por parte do fabricante e com excepção de erros.
Formulário de pedido de produtos especiais
O serviço de aquisições de ToolTeam®
Está à procura de produtos que são mostrados no catálogo mas que não podem ser comprados diretamente online?O nosso serviço de aprovisionamento terá todo o prazer em fazer-lhe uma oferta individual e não vinculativa.