zoom_in
zoom_out
fullscreen
-15%
Woelm KWS 6009 lock for door thicknesses of 65 - 70 mm 600902
SKU: T-686030
73,75 € (w tym podatek 19%, wył. Wysyłkę)
61,97 € (wył. VAT prawny, wył. Wysyłkę)
86,75 € Sugerowana cena producenta
W magazynie,gotowy do wysyłki w ciągu 48 godzin
Sztuka
doneMade in Germany
Malleable cast iron, stove-enamelled in silver, with central axis made of steel, with locking catch, compression spring and felt seals, door operation in pairs, information required on the right/left
Treść:
1 Sztuka
Wysyłka:
The shipping costs for Polska could not be calculated automatically.
Dostawca:
Sprzedaż i dostawa przez ToolTeam®
Metody Płatności:
Zwroty:
Bezpieczeństwo:
Dane produktu
Producent:
HELM - Woelm GmbH
Stan:
Nowy
SKU:
T-686030
Producent SKU:
600902
Kod GTIN (EAN):
2000000686030
Waga:
0,00 Kg
Wszystkie informacje dotyczące produktów od HELM - Woelm GmbH. Zmiany techniczne i optyczne producenta oraz błędy zastrzeżone.
This page has been machine-translated, the original german version can be found here, please also note the Zastrzeżenie dotyczące tłumaczeń.
Opis produktu
6009..
D = 65 - 70 mm
For two-sided door operation made of malleable cast iron with central axis made of steel, with locking catch, compression spring, felt seals
Door thicknesses >, 70 mm on request
Assembly
Drill a hole in the door for the axis according to the dimensions in the adjacent drawing, screw on the screw-on rosettes with felt seals underneath so that two screw holes are horizontal and two are horizontal .Align vertically with the central hole, push the pin part through and screw the hole part tight with a compression spring and a lock nut. Fasten the locking catch in the door frame at the appropriate point.
The operating range of the levers is 45º. The lock should be fitted so that the levers point upwards at an angle of 45º when in the open position.
Photo shows lock for left-hand door
Powiązane wyniki
Kompletne katalogi
Oferta skierowana jest wyłącznie do klientów biznesowych, firm, instytucji publicznych, handlowców i freelancerów. Wszystkie ceny w katalogach nie zawierają podatku VAT, kosztów wysyłki i ewentualnych dopłat.
Producent ponosi wyłączną odpowiedzialność za treść, cenę i szczegóły dotyczące produktów i ofert prezentowanych w katalogach. Z zastrzeżeniem zmian technicznych i optycznych przez producenta oraz błędów.
Producent ponosi wyłączną odpowiedzialność za treść, cenę i szczegóły dotyczące produktów i ofert prezentowanych w katalogach. Z zastrzeżeniem zmian technicznych i optycznych przez producenta oraz błędów.
Pasujący katalog
Oferta dla klientów komercyjnych**
Propozycje produktów
-9%
KWS 6028 lock with angled striking plate, one-sided
602807
42,40 €
wył. Wysyłkę
46,70 € Sugerowana cena producenta
wył. Wysyłkę
-7%
KWS 6128 locking plate e.g. Weld on, left/right
612806
35,20 €
wył. Wysyłkę
37,89 € Sugerowana cena producenta
wył. Wysyłkę
-7%
KWS 6538 angled striking plate for lock 6129..
653882
37,05 €
wył. Wysyłkę
39,85 € Sugerowana cena producenta
wył. Wysyłkę
-15%
KWS 6009 lock for door thicknesses of 65 - 70 mm
600907
86,25 €
wył. Wysyłkę
101,45 € Sugerowana cena producenta
wył. Wysyłkę
-18%
KWS 6129 angled locking plate for screwing on
612983
182,30 €
wył. Wysyłkę
222,05 € Sugerowana cena producenta
wył. Wysyłkę
-19%
KWS 6109 lock for door thicknesses of 65 - 70 mm
610982
284,35 €
wył. Wysyłkę
352,49 € Sugerowana cena producenta
wył. Wysyłkę
-9%
KWS 6001 lock for door thicknesses of 25 - 30 mm
600107
73,65 €
wył. Wysyłkę
81,10 € Sugerowana cena producenta
wył. Wysyłkę
KWS 6536 locking catch for lock 6001..-6009..
653607
4,25 €
wył. Wysyłkę
wył. Wysyłkę
-18%
KWS 6128 locking plate e.g. Weld on, left/right
612882
173,65 €
wył. Wysyłkę
211,45 € Sugerowana cena producenta
wył. Wysyłkę
-9%
KWS 6101 lock for door thicknesses of 25 - 30 mm
610106
58,35 €
wył. Wysyłkę
64,29 € Sugerowana cena producenta
wył. Wysyłkę
KWS 6539 strike plate for lock 6128..
653906
5,15 €
wył. Wysyłkę
wył. Wysyłkę
KWS 6537 strike plate for lock 6001..-6109..
653783
14,40 €
wył. Wysyłkę
wył. Wysyłkę
KWS 6536 locking catch for lock 6001..-6009..
653602
3,95 €
wył. Wysyłkę
wył. Wysyłkę
-7%
KWS 6129 angled locking plate for screwing on
612906
37,10 €
wył. Wysyłkę
39,90 € Sugerowana cena producenta
wył. Wysyłkę
-9%
KWS 6001 lock for door thicknesses of 25 - 30 mm
600102
60,25 €
wył. Wysyłkę
66,35 € Sugerowana cena producenta
wył. Wysyłkę
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Woelm KWS 6009 lock for door thicknesses of 65 - 70 mm 600902
on both sides
compression spring
stove-enamelled
felt seal
lever
lever lock
Made in Germany
in pairs
locking catch
silver-colored
lock
two-sided
6009..
D = 65 - 70 mm
For two-sided door operation made of malleable cast iron with central axis made of steel, with locking catch, compression spring, felt seals
Door thicknesses >, 70 mm on request
Assembly
Drill a hole in the door for the axis according to the dimensions in the adjacent drawing, screw on the screw-on rosettes with felt seals underneath so that two screw holes are horizontal and two are horizontal .Align vertically with the central hole, push the pin part through and screw the hole part tight with a compression spring and a lock nut. Fasten the locking catch in the door frame at the appropriate point.
The operating range of the levers is 45º. The lock should be fitted so that the levers point upwards at an angle of 45º when in the open position.
Photo shows lock for left-hand door T-686030 600902 2000000686030 pl ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/pl-PL/woelm-kws-6009-lock-for-door-thicknesses-of-65-70-mm-600902-t-686030-2000000686030?dc=PL&cu=EUR 2026-08-08 73.75 Polska PL DE 14
6009..
D = 65 - 70 mm
For two-sided door operation made of malleable cast iron with central axis made of steel, with locking catch, compression spring, felt seals
Door thicknesses >, 70 mm on request
Assembly
Drill a hole in the door for the axis according to the dimensions in the adjacent drawing, screw on the screw-on rosettes with felt seals underneath so that two screw holes are horizontal and two are horizontal .Align vertically with the central hole, push the pin part through and screw the hole part tight with a compression spring and a lock nut. Fasten the locking catch in the door frame at the appropriate point.
The operating range of the levers is 45º. The lock should be fitted so that the levers point upwards at an angle of 45º when in the open position.
Photo shows lock for left-hand door T-686030 600902 2000000686030 pl ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/pl-PL/woelm-kws-6009-lock-for-door-thicknesses-of-65-70-mm-600902-t-686030-2000000686030?dc=PL&cu=EUR 2026-08-08 73.75 Polska PL DE 14