Rothoblaas - Tapes, Sealants and Membranes Strona 56
Oferta dla klientów komercyjnych**Najlepiej sprzedający się od RothoBlaas Deutschland
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
TAPES HOW IS THE TAPE MADE? RELEASE LINER: removable anti-adhesive layer that makes it possible to unwind the tape ADHESIVE: solvent-free adhesive mass REINFORCING LAYER: polymeric grid that provides strength and stiffness to the final product ADHESIVE: solvent-free adhesive mass PRIMER: layer that serves as a binder between the support and the adhesive SUPPORT: film to which the adhesive mix and the other components are applied INTERNAL CORE: cardboard or plastic cylinder around which the tape is wound FINGERLIFT: part of the liner that sticks out in order to simplify its removal CHOOSE A SEALING PRODUCT OR TAPE 1. Examine the nature of the surfaces and their shape. Very irregular surfaces require more glue in order to activate the adhesion process. 2. Water, sudden temperature changes and exposure to UV rays may shorten the service life of the products. The best-performing products can remain functional even with a damp support surface. 3. It is necessary to analyse the mechanical stress to which the product will be subjected once it is working. During the application phase, it is important to reduce tension and elongation down to a minimum. 4. Prior to application, check to see whether any technical requirements must be complied with. 5. It is mandatory to comply with the final date, if indicated, within which the product has to be applied. Keep the tapes in their original packing to avoid any direct exposure to sunlight and prevent any contact with dust and dirt. For storage, it is generally a good idea to ensure certain conditions are met: temperature between 5 and 25 °C, relative humidity below 65% and avoid extreme weather conditions and direct exposure to heat sources. 56 | TAPES | TAPES AND SEALANTS
339 Strony | Ważny do 04/2024 | Previous page | Następna strona
Wybierz swój język
Zagadnienia prawne
Producent ponosi wyłączną odpowiedzialność za treść, cenę i szczegóły dotyczące produktów i ofert prezentowanych w katalogach. Z zastrzeżeniem zmian technicznych i optycznych przez producenta oraz błędów.
Formularz zapytania o produkty specjalne
Usługa zaopatrzenia ToolTeam®
Szukasz produktów, które znajdują się w katalogu, ale nie można ich kupić bezpośrednio online?Nasz dział zaopatrzenia z przyjemnością przedstawi Ci niezobowiązującą, indywidualną ofertę.
