Pneumax - Hauptkatalog Strona 433
Oferta dla klientów komercyjnych**Najlepiej sprzedający się od Pneumax GmbH
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
Solenoid valves manifold Series 2300 - ENOVA® Manual over-ride function Push to actuate (when released it moves back to the original position) Unstable function 1 Push and turn to get the bistable function 2 Bistable function NOTE: It is strongly suggested to replace the original position after using Manifold assembly The assembly procedure should start from the end-plate which should be positioned on a flat surface. Add the requested modules by simply rotating by 180° the fastening pins by means of a 1x5.5 flat screw driver. The last module to be assembles shall be the inlet module Fastening pins rotation direction: - To lock: rotate anticlockwise (in the direction of the LOCK print on the case) - To unlock: rotate clockwise (in the direction of the UNLOCK print on the case) The same procedure shall be used to add or remove any module. 180° 180° 180° 180° Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 | 413 Air distributiOn 1
1106 Strony | Ważny do 06/2025 | Previous page | Następna strona
Wybierz swój język
Zagadnienia prawne
Producent ponosi wyłączną odpowiedzialność za treść, cenę i szczegóły dotyczące produktów i ofert prezentowanych w katalogach. Z zastrzeżeniem zmian technicznych i optycznych przez producenta oraz błędów.
Formularz zapytania o produkty specjalne
Usługa zaopatrzenia ToolTeam®
Szukasz produktów, które znajdują się w katalogu, ale nie można ich kupić bezpośrednio online?Nasz dział zaopatrzenia z przyjemnością przedstawi Ci niezobowiązującą, indywidualną ofertę.
