Pferd drilling and countersinking tools Strona 23
Oferta dla klientów komercyjnych**Najlepiej sprzedający się od PFERD
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
Countersink tools HSS flat countersinks Recommended rotational speed range [RPM] To determine the recommended cutting speed range [m/min], please proceed as follows: ➊ Select the material group to be machined. ➋ Select the type. ➌ Establish the cutting speed range. To determine the recommended rotational speed range [RPM], please proceed as follows: ➍ Select the required diameter. ➎ The cutting speed range and the diameter determine the recommended rotational speed range. ➊ Material group Steel, cast steel Steels up to 700 N/mm² Steels over 700 N/mm² Stainless steel (INOX) Plastics, other materials Construction steels, carbon steels, tool steels, alloyed and non-alloyed steels, case-hardened steels, cast steel Rust and acid-resistant steels Austenitic and ferritic stainless steels Soft non-ferrous metals Aluminium alloys, brass, copper, zinc Hard non-ferrous metals Bronze, titaniumium/titanium alloys, hard aluminium alloys (high Si content) Grey cast iron, white cast iron Cast iron with flake graphite EN-GJL (GG), with nodular graphite/nodular cast iron EN-GJS (GGG), white annealed cast iron EN-GJMW (GTW), black cast iron EN-GJMB (GTS) Non-ferrous metals Cast iron ➋ Type Fibre-reinforced thermoplastics and duroplastics, hard rubber, wood Example: Flat countersink FLS HSS DIN 373 15,0 F, Flat countersink dia. 15 mm. Steels up to 700 N/mm². Cutting speed: 10–20 m/min Rotational speed range: 220–440 RPM ➌ Cutting speed fine (F) medium (M) tapping hole (GKL) fine (F) medium (M) tapping hole (GKL) fine (F) medium (M) tapping hole (GKL) fine (F) medium (M) tapping hole (GKL) fine (F) medium (M) tapping hole (GKL) 10–20 m/min 10–15 m/min 10–15 m/min 15–20 m/min 10–20 m/min fine (F) medium (M) 10 m/min tapping hole (GKL) fine (F) medium (M) 10–15 m/min tapping hole (GKL) ➍ ➎ Cutting speeds [m/min] Countersink dia. [mm] 10 15 Rotational speeds [RPM] 20 6.00 8.00 10.00 11.00 15.00 18.00 20.00 530 400 320 290 220 180 160 795 600 480 435 330 270 240 1,060 800 640 580 440 360 320 23
26 Strony | Ważny do 12/2025 | Previous page | Następna strona
Wybierz swój język
Zagadnienia prawne
Producent ponosi wyłączną odpowiedzialność za treść, cenę i szczegóły dotyczące produktów i ofert prezentowanych w katalogach. Z zastrzeżeniem zmian technicznych i optycznych przez producenta oraz błędów.
Formularz zapytania o produkty specjalne
Usługa zaopatrzenia ToolTeam®
Szukasz produktów, które znajdują się w katalogu, ale nie można ich kupić bezpośrednio online?Nasz dział zaopatrzenia z przyjemnością przedstawi Ci niezobowiązującą, indywidualną ofertę.
