Gedore Specialty tools catalogue Strona 7
Oferta dla klientów komercyjnych**Najlepiej sprzedający się od GEDORE
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
wył. Wysyłkę
(Code 2944057) KL-0029-1303 Shock Absorber Holding-Down Clamp KL-0029-1303 Suitable for use on Audi A1 (8X), Seat Ibiza V (6J5), Seat Ibiza V ST (6J8), Škoda Rapid, VW Polo V (6R) etc. Intended to ease the removal of suspension struts. The KL-0029-1303 shock absorber holding-down clamp is designed to be used in conjunction with the KL-0029-100 A base coil spring pre-compressor and the KL-0029-130 upgrade kit. It ensures that the piston rod is securely held in the upper spring plate and pressed down while the suspension strut is being pre-compressed. (Code 3269396) (Patented) KL-0104-21 KB Spreader Tool Kit (adjustable), with Wedge No.1 + 2 + 4 + 5 KL-0104-21 KB 6 pcs. Applicable to strut clamping bores as found in: Audi A3 (8P, 8V), Audi TT (8S); VW Arteon (3H), Golf IV (1J), Golf V (1K), Golf VI (1K), Golf VII (AU), Passat (3C, 362, 365), T5 (7H, 7J), T6 (7H, 7J); BMW 2 Series (F45); Citroën; Fiat Panda (312); Ford Tourneo Connect, Galaxy (CK); Kia Sportage; Mercedes GLA (X156), Vito, V-Class; Nissan Qashqai (J10, 2006-2013); Seat; Škoda Kodiq; Renault Clio (IV), Kadjar (2015-2018), Megane (IV); Peugeot; Jeep; Volvo V70; Japanese vehicles etc. Also suitable for spreading the slot (clamp) in the front wheel bearing housing (steering knuckle) to allow for proper removal of the lower ball joint from the following vehicles: Audi A4 (8K), A5 (8T, 8F), A6 (4G), A7 (4G), A8 (4H), Q5 (8R) etc. Alternative tools: VAG 3424; VAG T20040; BMW 312230 The spreader tool kit is designed to professionally expand the strut clamping bore in steering knuckles. It can also be used to spread the slot (clamp) on the front wheel bearing housing (steering knuckle) to allow for the damage-free removal of the lower ball joint. This procedure is an absolute must to ensure the proper removal of tightfitting or stuck spring/shock absorber units and lower suspension ball joints respectively. Special features of the tool are the floating bolts that prevent the tool from jamming and the special spreader wedge which is provided with a limit stop to avoid excessive knuckle widening. Prevents expensive damage to the cast iron or aluminium steering knuckle or other chassis components that may be caused by unprofessional removal/ installation attempts. Thanks to its variably adjustable spreader tip, this tool is also ideal for use on vehicles with steering knuckles having a non-centralised slot! An indispensable tool when changing springs, shock absorber units as well as suspension ball joints. KL-0104-21-1 B Technical Data: Spreader wedge No.1: Spreader wedge No.2: Spreader wedge No.4: Spreader wedge No.5: a: 5.5mm; b: 12mm a: 2.0mm; b: 8.0mm a: 5.5mm; b: 9.5mm a: 12.5mm; b: 17mm Scope of Delivery: KL-0104-21 KB Spreader Tool Kit (adjustable), with Wedge Part No. KL-0104-21-1 B KL-0104-2124 KL-0104-2125 KL-0104-2141 KL-0104-2190 Description Spreader Tool (adjustable), with Wedge No.1 + 2 Pressure Screw, with Wedge No.4 Pressure Screw, with Wedge No.5 Bolt with M10 Thread Plastic Storage Case with Insert Qty 1 1 1 1 1 Scope of Delivery: KL-0104-21-1 B Spreader Tool with Wedge No.1 and No.2 Part No. KL-0104-21-2 B KL-0104-2122 Description Spreader Tool (adjustable) with Wedge No.1 Pressure Screw with Wedge No.2 Qty 1 1 (Code 3235580) KL-0104-214 Spreader Tool Upgrade Kit, Lower Ball Joint, Audi KL-0029-1303 Suitable for use on the lower ball joint clamp (slot) in the front wheel bearing housing (steering knuckle). Applications: Audi A4 (8K), A5 (8T, 8F), A6 (4G), A7 (4G), A8 (4H), Q5 (8R) etc. The kit is intended to complement the earlier spreader tool kits KL-0104-21-1 A and KL-0104-21 A. Used to professionally spread the clamp (slot) in the front wheel bearing housing (steering knuckle) accommodating the lower ball joint. Copyright GEDORE Automotive GmbH, Germany 7
216 Strony | Ważny do 12/2024 | Previous page | Następna strona
Wybierz swój język
Zagadnienia prawne
Producent ponosi wyłączną odpowiedzialność za treść, cenę i szczegóły dotyczące produktów i ofert prezentowanych w katalogach. Z zastrzeżeniem zmian technicznych i optycznych przez producenta oraz błędów.
Formularz zapytania o produkty specjalne
Usługa zaopatrzenia ToolTeam®
Szukasz produktów, które znajdują się w katalogu, ale nie można ich kupić bezpośrednio online?Nasz dział zaopatrzenia z przyjemnością przedstawi Ci niezobowiązującą, indywidualną ofertę.
