zoom_in
zoom_out
fullscreen
MUNK Multiple-flight vertical ladder with back protection (machinery) galvanised steel 19.96m 520271
Artikelnummer: T-842341
In voorraad,klaar voor verzending binnen 48h
Stuk
doneMade in Germany
Multi-section fixed ladder with back protection (machines) galvanized steel
Inhoud:
1 Stuk
Verzenden:
De verzendkosten voor Nederland konden niet automatisch worden berekend.
Aanbieder:
Verkoop en levering door ToolTeam Köln
Betalingsmethoden:
Retourneren:
Veiligheid:
Productgegevens
Fabrikant:
MUNK GmbH
Voorwaarde:
Nieuw
Artikelnummer:
T-842341
SKU fabrikant:
520271
GTIN-code (EAN):
4031405943452
Gewicht:
466,00 Kg
Alle informatie met betrekking tot producten van MUNK GmbH. Technische en optische wijzigingen van de fabrikant en fouten voorbehouden.
Deze pagina is machinaal vertaald, de originele duitse versie kunt u vinden op here, let ook op de Vertaling Disclaimer.
Productomschrijving
- Range of application
- Access to machinery and mechanical systems.
- Irrespective of the climbing height:
- As a safety railing, back protection is preferable to fall protection (combination is not permitted as the rescue of persons is hindered by the back protection).
- The need for an occupational medical examination for suitability for working at height (e.g. G 41) depends on the risk assessment (e.g. total climbing height, type of safety railing) of the respective vertical ladder systems
- Proof of the load capacity of the underlying surface must be checked and approved for each construction project by a cognizant stability expert
- Barrier (safety door) is always required
- If required by the access situation, vertical ladders with fall protection must be fitted with suitable protective devices (e.g. steel lockable door) to prevent unauthorised use.
- For lateral bridging steps, the ladder sections must run at a higher level
- The overlap of the back protection must be at least 2,000 mm for multiple-flight ladders.
- At unsecured exit points, railings attached to both sides of the vertical ladder or led into the exit level are required
- Gap at exit step must not be larger than 60 – 75 mm
- Step-on dimension: Distance from entry level to the first rung 100–400 mm. The top edge of the uppermost rung must be at the same height as the walking surface of the exit point.
- The clearances between the vertical ladder system and the railing must not exceed 120 mm
- The connection to the fall protection must be established and released from a secured standing position. A secured standing position is, for example, a platform with railing and a secured access
- A safety door, order no. 063502, is required for the exit. This is not included in the scope of delivery of the complete set and must be ordered separately
- The maximum height of the individual ladder sections is 6.0 m
- 19,96m
Gerelateerde resultaten
MUNK Günzburger Steigtechnik
MUNK
climbing technology
Günzburg
step ladders
rung ladders
platform ladders
platform ladders
steps
platforms
floorboards
stairs
oversteps
catwalks
scaffolding
fixed ladders
shaft ladders
material handling
small work platforms
lifts
rescue technology
fire brigade ladders DIN EN 1147
Fire brigade ladders ÖNORM F 4047
rescue platforms
tool boxes / boxes
tool shed equipment
other equipment
vehicle installations
vehicle attachments
roll containers
eRC
Volledige catalogi
Het aanbod is uitsluitend gericht op zakelijke klanten, bedrijven, openbare instellingen, handelaars en freelancers. Alle prijzen in de catalogi zijn exclusief BTW, verzendkosten en eventuele toeslagen.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Productsuggesties
Step straight ladder without stabiliser 16 steps
40316
€ 297,70
excl. verzending
€ 495,05 Adviesprijs
excl. verzending
Standing grille brown
11177
€ 146,15
excl. verzending
€ 242,75 Adviesprijs
excl. verzending
Stairs with 45° platform, step width 1,000 mm 17 steps Grooved aluminium
600477
€ 2.765,95
excl. verzending
€ 4.648,15 Adviesprijs
excl. verzending
Exit side-rail with railing attachment
63050
€ 128,75
excl. verzending
€ 211,80 Adviesprijs
excl. verzending
Stairs 45° step width 600 mm 17 steps Grooved aluminium
600257
€ 2.004,70
excl. verzending
€ 3.368,89 Adviesprijs
excl. verzending
Mobile scaffolding SG 1.35 נ3 m with chassis bar & double platform platform height 9.70 m
175937
€ 9.134,79
excl. verzending
€ 15.351,00 Adviesprijs
excl. verzending
Double-sided stepladder with clip-step R13 2x9 steps
41642
€ 551,10
excl. verzending
€ 917,49 Adviesprijs
excl. verzending
Retrofit kit clip-step for platform ladder 9 steps
50296
€ 78,25
excl. verzending
€ 128,50 Adviesprijs
excl. verzending
Retrofit kit clip-step R13 for double-sided step ladder, with double-sided access 8 steps
41558
€ 150,45
excl. verzending
€ 249,90 Adviesprijs
excl. verzending
Work platform, with double-sided access, steel grating 2x2 steps
50062
€ 279,10
excl. verzending
€ 464,10 Adviesprijs
excl. verzending
Retrofit kit clip-step relax for step straight ladder / step push-up extension ladder 16 step paddings
41853
€ 189,05
excl. verzending
excl. verzending
(€ 11,82 / Stuk)
€ 314,15 Adviesprijs
Single-sided stepladder with clip-step relax 9 steps
42109
€ 436,00
excl. verzending
€ 725,90 Adviesprijs
excl. verzending
Retrofit kit clip-step relax for double-sided step ladder with double-sided access 6 step paddings
41674
€ 71,79
excl. verzending
excl. verzending
(€ 11,97 / Stuk)
€ 117,80 Adviesprijs
Stairs with 45° platform step width 600 mm 12 steps Grooved aluminium
600432
€ 1.824,85
excl. verzending
€ 3.066,65 Adviesprijs
excl. verzending
2-section rung push-up extension ladder with nivello® stabiliser 2x18 rungs
20418
€ 652,19
excl. verzending
€ 1.095,99 Adviesprijs
excl. verzending
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
MUNK Multiple-flight vertical ladder with back protection (machinery) galvanised steel 19.96m 520271
MUNK Günzburger Steigtechnik
MUNK
climbing technology
Günzburg
step ladders
rung ladders
platform ladders
platform ladders
steps
platforms
floorboards
stairs
oversteps
catwalks
scaffolding
fixed ladders
shaft ladders
material handling
small work platforms
lifts
rescue technology
fire brigade ladders DIN EN 1147
Fire brigade ladders ÖNORM F 4047
rescue platforms
tool boxes / boxes
tool shed equipment
other equipment
vehicle installations
vehicle attachments
roll containers
eRC
- Range of application
- Access to machinery and mechanical systems.
- Irrespective of the climbing height:
- As a safety railing, back protection is preferable to fall protection (combination is not permitted as the rescue of persons is hindered by the back protection).
- The need for an occupational medical examination for suitability for working at height (e.g. G 41) depends on the risk assessment (e.g. total climbing height, type of safety railing) of the respective vertical ladder systems
- Proof of the load capacity of the underlying surface must be checked and approved for each construction project by a cognizant stability expert
- Barrier (safety door) is always required
- If required by the access situation, vertical ladders with fall protection must be fitted with suitable protective devices (e.g. steel lockable door) to prevent unauthorised use.
- For lateral bridging steps, the ladder sections must run at a higher level
- The overlap of the back protection must be at least 2,000 mm for multiple-flight ladders.
- At unsecured exit points, railings attached to both sides of the vertical ladder or led into the exit level are required
- Gap at exit step must not be larger than 60 – 75 mm
- Step-on dimension: Distance from entry level to the first rung 100–400 mm. The top edge of the uppermost rung must be at the same height as the walking surface of the exit point.
- The clearances between the vertical ladder system and the railing must not exceed 120 mm
- The connection to the fall protection must be established and released from a secured standing position. A secured standing position is, for example, a platform with railing and a secured access
- A safety door, order no. 063502, is required for the exit. This is not included in the scope of delivery of the complete set and must be ordered separately
- The maximum height of the individual ladder sections is 6.0 m