WEICON Main Catalogue Chemical and technical products Pagina 90
Commercieel klantenaanbod**Beste verkopers van Weicon
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Gasket Maker Permanently elastic special sealant WEICON Gasket Maker is a strong and permanently elastic special sealant that cures with air humidity and practically without shrinkage. Gasket Maker has a very good adhesion to steel, aluminium, glass, ceramic, and many other materials. Gasket Maker has an excellent temperature, oil and grease resistance, is pressure- and ageing-resistant, UV-stable and permanently elastic. Adhesives / Sealants The special sealant can be used on engines and water pumps, gears and axles, oil sumps and in many other applications. ► 310 ml 10049930 ► 310 ml 10049931 red black Technical data WEICON Gasket Maker in non-cured condition black red Technical Sprays Base: one-component acetate Density (g/cm³): 1.28 1.06 Viscosiy: pasty pasty Stability/Run-off (ASTM D 2202) mm: 1 >1 by humidity Cure type: Curing condition: Skin-over time (minutes):*³ Technical Liquids Cure speed:*³ Volume change (DIN 52451) %:*³ +5°C to +35°C (+41 to +95°F) and 30% to 95% rel. humidity 12 7 2-3 mm in the first 24 hours -1 % -3 % Gap filling up to max. mm: 5 Gap width up to max. mm: 25 Shelf life in months: 12 (room temperature) Assembly Pastes WEICON Gasket Maker in cured condition Shore hardness A (DIN 53505 / ASTM D 2240): Elongation at break ISO 37, S3A [%] Tensile strength ISO 37, S3A [N/mm²] Tension strength value at 100 % (ISO 37, S3A) Lubricants Movement capacity max. %: Temperature resistance: Paintable: 35 30 500 2.0 N/mm² (290 psi) 0.9 N/mm² 0.7 N/mm² 15 15 (130 psi) (100 psi) -60°C to +280°C (-76°F to +536°F) briefly up to (approx. 2 h) +300°C (+572°F) cannot be painted Building material category (DIN 4102): B2 WEICON TOOLS® *³ Normal climate +23°C (+73°F) and 50% relative humidity in accordance with DIN 50014. Other VIDEO 90 Catalogue WEICON
244 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.