WEICON Main Catalogue Chemical and technical products Pagina 65
Commercieel klantenaanbod**Beste verkopers van Weicon
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Structural Acrylic Adhesives Easy-Mix Adhesives / Sealants PE-PP 45 PE-PP 50 Easy-Mix PE-PP 45 ► 45 ml 10057687 nearly colourless, translucent Technical Sprays Hand Dispenser D 50 10:1 10059295 Mixing Nozzles 10:1 B 10063196 Technical Liquids Special Piston 10023341 For retooling the Hand Dispenser Easy-Mix D 50 to Easy-Mix PE-PP 45 Tensile shear strength of WEICON Easy-Mix PE-PP 45 compliant with DIN EN 1465 in temperature curve Assembly Pastes Due to its slightly higher viscosity, WEICON Easy-Mix PE-PP 45 compensates bonding gaps of up to 1 mm and, thanks to the fillers (glass beads) contained in the adhesive, guarantees adhesive joint of at least 0.20 mm. MPa pot life 2-3 minutes ► bonding gap bridging min. 0.15 - 0.20 mm ► handling strength after 120 - 180 minutes ► 8 PP/PP PE/PE PTFE/PTFE 6 4 Lubricants 2 0 -20°C (-4°F) Ageing resistance of PE adhesive bonds Ageing resistance of PP adhesive bonds +23°C (+73°F) +50°C (+122°F) +60°C (+140°F) +70°C (+158°F) +80°C (+176°F) Control value at RT Water +75°C (+176°F) Strength development of WEICON Easy-Mix PE-PP 45 on tensile shear test samples compliant with DIN EN 1465 Ketone (MEK) MPa WEICON TOOLS® after storage in various media (14 days at room temperature) 4 Toluene Dry heat +70°C +70°C (+158°F) 3 Isopropanol 2 PP/PP Al/Al Oil 1 2 3 4 Specification of the test specimen: Standard: DIN EN 1465 Curing: Adhesive surface: 12.5 mm x 25 mm Adhesive thickness: 0.2 mm 5 6 7 8 MPa 1 0 7 days at room temperature Testing speed: 10 mm/min 0 30 60 90 120 150 180 Other 0 minutes Catalogue WEICON 65
244 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.