WEICON Main Catalogue Chemical and technical products Pagina 198
Commercieel klantenaanbod**Beste verkopers van Weicon
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Adhesives / Sealants Technical Data AL-T AL-M AL-W AL-H AL-F Silicone Grease Silicone Grease HV Abbreviation (DIN 51502): KPL 2 R -20 KF 2 K –20 KPL 1-2 E -25 KPHC 1P -40 KLF 2K -30 MSI2 S-50 MSI3S-40 Consistency assignment (DIN 51818): NLGI-class 2 NLGI-class 2 NLGI-class 1-2 NLGI-class 1 NLGI-class 2 NLGI-class 2-3 NLGI-class 3 Mineral oil Mineral oil Mineral oil Polyalphaolefin Mineral oil Silicone oil Silicone oil Aluminium complex soap Li/Ca soap/MoS2 Spec. calcium soap Aluminium complex soap Lithium Gel Gel darkbrown black beige white white colourless translucent translucent Welding load 2.400 N 3.400 N 3.400 N 3.600 N 3.400 N --- --- Goods load 2.200 N 3.200 N 3.200 N 3.400 N 3.200 N --- --- Spherical cap value (1 Min / 1000 N) 2,0 mm 0,5 mm 0,7 mm 0,6 mm 0,8 mm --- --- Speed identifying value (ka . n . dm): 200.000 400.000 450.000 400.000 350.000 --- --- Worked penetration (DIN ISO 2137): 265-295 1/10 mm 265-295 1/10 mm 285-315 1/10 mm 310-340 1/10 mm 265-295 1/10 mm 240-270 1/10 mm 240-270 1/10 mm 0 - 90 1 - 90 0 - 40 1 - 90 1 - 90 1-90 1-90 -25°C to +190°C (-13 to +374°F) -20°C to +120°C (-4 to +248°F) -25°C to +80°C (-13 to +176°F) -40°C to +160°C (-40 to +320°F) -30°C to +120°C (-22 to +248°F) -50°C to +200°C (-58 to +392°F) -40°C to +200°C (-40 to +392°F) >200 °C (+392 °F) Base oil: Base thickener: Technical Sprays Colour: VKA Test (DIN 51 350): Water resistance (DIN 51807): Technical Liquids Temperature resistance: Drop point (IP 396): >210°C (+410°F) >170°C (+338°F) >100°C (+212°F) >200°C (+392°F) >190°C (+374°F) >200 °C (+392 °F) +40°C (+104°F) 230 mm²/s 160 mm²/s 100 mm²/s 400 mm²/s 100 mm²/s 75 mm²/s 2400 mm²/s +100°C (+212°F) 15 mm²/s 15 mm²/s 9 mm²/s 40 mm²/s 9 mm²/s 31 mm²/s 1000 mm²/s --- --- no corrosion --- --- --- --- 0/0 0/0 1/2 1/2 Base oil viscosity (DIN 51 562): Salt spray test with separated protective coats (Federal German Armed Forces Regulations 336 h/35°C, 5% NaCl): EMCOR test (DIN 51 802 distilled water): Assembly Pastes EMCOR test (DIN 51 802 3% NaCl solution): Density at +20°C (+68°F) (DIN 51757): 0,94 g/cm³ Conforms to: ./. 0/0 0,92 g/cm³ 0,94 g/cm³ 0,93 g/cm³ 0,90 g/cm³ 0,98 g/cm³ >1,00 g/cm³ ./. Federal German Armed Forces TL 9150-0066, NATO specification G-460 NSF-H 1 NSF-H 2 NSF-H 1 NSF-H 1 1.490 J/(g·K) 1.766 J/(g·K) 1.762 J/(g·K) 1.838 J/(g·K) 1.832 J/(g·K) 1.295 J/(g·K) 1.295 J/(g·K) 0,372 W/m·K 0,491 W/m·K 0,494 W/m·K 0,394 W/m·K 0,524 W/m·K 0,445 W/m·K 0,445 W/m·K 11,0 kV/mm 11,5 kV/mm 9,5 kV/mm 29,6 kV/mm 7,8 kV/mm 9,2 kV/mm 9,2 kV/mm 24 24 24 24 24 24 24 AL-T AL-M AL-W AL-H AL-F Silicone Grease Rolling bearings • • • • • Sliding bearings • • • • • Heat capacity: Thermal conductivity (ISO 22007-4): +20 °C (+68 °F) Dielectric strength (DIN EN 60243-1): Shelf life at least (months)*: Lubricants 0/0 0/0 WEICON TOOLS® Type selection table Other Chains • Joints • • • • • • • Levers • • • • • • • • • • • • • Sliding guides • Linear guide systems • Spindles • • • Spline shafts • • • • • • • Camshafts • Springs • Open gears • • • Worm gears • • • Cables 198 Silicone Grease HV Catalogue WEICON • • • • • •
244 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.