WEICON Main Catalogue Chemical and technical products Pagina 193
Commercieel klantenaanbod**Beste verkopers van Weicon
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Anti-Seize Anti-Seize Anti-Seize High-Tech Copper Paste Anti-Seize Nickel Anti-Seize Ceramic Paste ++ + + -++ ++ --++ ++ + + -++ ++ --++ ++ + + -++ ++ --++ ++ + + -++ ++ --++ ++ + + -++ ++ --++ ++ ++ -++ + ++ ++ ++ ++ + ++ ++ ++ -++ + ++ ++ ++ ++ + ++ ++ ++ -++ + ++ ++ ++ ++ + ++ ++ ++ -++ + ++ ++ ++ ++ + ++ ++ ++ -++ + ++ ++ ++ ++ + ++ ACM - Acrylate rubber CR - Chloroprene rubber CSM - Chlorosulfonated PE rubber EPDM - Ethylene propylene diene rubber FKM - Fluorocaoutchoc NBR - Nitrile butadiene rubber NR - Natural rubber SBR - Styrene butadiene rubber SQM/VMQ - Silicone rubber Technical Sprays WEICON Anti-Seize products and their behaviour towards sealing materials (elastomers) Adhesives / Sealants Assembly Pastes PA - Polyamide PC - Polycarbonate PE-UHMW - Polyethylene with ultra high molar weight PE-LD - Polyethylene with low density PET - Polyethyleneterephthalate POM - Polyoxymethylene PP - Polypropylene PTFE - Polytetrafluor ethylene PUR - Polyurethane PVC - Polyvinylchloride ++ resistant + resistant to a limited extent Assembly Pastes ABS - ABS copolymeride Technical Liquids WEICON Anti-Seize products and their behaviour towards polymer materials -- not resistant Colour OFW device coefficient of friction Coefficient of friction total Anti-Seize Anti-Seize High-Tech Anti-Seize Nickel Copper Paste Anti-Seize Ceramic Paste synthetic oil mixture medicinal oil synthetic oil mineral oil Polyalphaolefin anthracite white anthracite copper white 0.13 0.10 to 0.13 0.16 --- --- 0.11 µ 0.11 µ 0.12 µ 0.13 μ 0.15 μ Coefficient of friction thread 0.13 µ 0.12 µ 0.14 µ 0.14 μ 0.17 μ Coefficient of friction on upside down 0.10 µ 0.10 µ 0.11 µ 0.12 μ 0.14 μ VKA-TEST (DIN 51350) goods load 4,200 N 3,600 N --- 3,000 N 7,000 N VKA-TEST (DIN 51350) welding load 4,400 N 3,800 N 2,000 N 3,200 N 7,500 N 0,6 mm VKA-TEST (DIN 51350) Spherical cap value (1 Min/1000N) 0,5 mm 0,7 mm 0,6 mm --- Worked penetration (DIN ISO 2137) 310 to 340 1/10 mm 310 to 340 1/10 mm 310 to 340 310 to 340 1/10 mm --- < 0.1% < 0.1% < 0.1% < 0.1% 6% Sulphur content (DIN 51400) Water resistance (DIN 51807) Temperature resistance Pressure load Density at +20°C (+68°F) (DIN 51757) 0 - 90 0 - 91 0 - 91 0 - 91 1-90 -180 to +1,200°C (-292 to +2,192°F) -40 to +1,400°C (-40 to +2,552°F) -30 to +1,450°C (-22 to +2,642°F) -20 to 1,100°C (-4 to +2,012°F) -40 to +1,400 °C (-40 to +2,552 °F) 230 N/mm2 (33.400 psi) 230 N/mm2 (33.400 psi) 230 N/mm2 (33.400 psi) --- --- 1.42 g/cm 1.30 g/cm3 1.1 g/cm³ 1.2 g/ml 1.16 g/cm Salt spray test 3 3 > 170 h > 170 h > 170 h --- > 500 h Dielectric strength 0.47 kV/mm 0.40 kV/mm --- --- --- Specific resistance 1.2 x 1015 Ω·cm 1.0 x 1015 Ω·cm --- --- --- 1.325 J/(g·K) 1.574 J/(g·K) 1.493 J/(g·K) 1.713 J/(g·K) --- 0.546 W/(m·K) 0.675 W/(m·K) 0.582 W/(m·K) 0.392 W/(m·K) --- 1.3 kV/mm 6.3 kV/mm 1.1 kV/mm 1.7 kV/mm --- Specific heat capacity Thermal conductivity (ISO 22007-4) Dielectric strength (DIN EN 60243-1) +20°C (+68°F) Catalogue WEICON WEICON TOOLS® Basic oil Other Technical Data Lubricants The specified resistance levels are based on laboratory tests and literature notices. A guarantee cannot be provided due to the large number of raw materials used on the one hand and the complex chemical and morphological structure of the polymers on the other. In critical application cases, we recommend that you carry out tests and/or consult with our application technology department. 193
244 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.