WEICON Main Catalogue Chemical and technical products Pagina 124
Commercieel klantenaanbod**Beste verkopers van Weicon
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Adhesives / Sealants Technical Data WEICON Adhesives and Sealants in non-cured condition Silicone A Silicone LP* Silicone N Silicone F HT 300 Black-Seal 1-C Polysiloxane (acetate) 1-C Polysiloxane (acetate) 1-C Polysiloxane (pentanonoxime) 1-C Polysiloxane (pentanonoxime) 1-C Polysiloxane (acetate) 1-C Polysiloxane (acetate) Density (g/cm³): 1.03 1.00 1.17 1.00 1.18 1.04 Viscosity: pasty pasty pasty 30.000 mPa.s pasty pasty 1 1 1 liquid 1 >1 +5°C to +35°C*² (+41 to +95°F) +5°C to +35°C*² (+41 to +95°F) +5°C to +35°C*² (+41 to +95°F) +5°C to +35°C*² (+41 to +95°F) +5°C to +35°C*² (+41 to +95°F) +5°C to +35°C*² (+41 to +95°F) by humidity by humidity by humidity by humidity by humidity by humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity +5°C to +40°C (+41 to +104°F) and 30% to 95% rel. humidity Technical Sprays Base: Stability/Run-off (ASTM D 2202) mm: Processing temperature: Technical Liquids Cure type: Curing condition: Skin-over time (minutes):*³ 15 10 7 15 8 7 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours 2-3 mm in the first 24 hours < -6 % < -6 % < -6 % -9 % < -6 % < -6 % Gap filling up to max. mm: 5 5 5 2 5 5 Gap width up to max. mm: 25 25 25 --- 25 25 Shelf life in months: 15 12 12 12 12 12 Cure speed:*³ Assembly Pastes Volume change (DIN 52451) %:*³ (at constant room temperature) WEICON TOOLS® Lubricants WEICON Adhesives and Sealants in cured condition Shore-A-Hardness (DIN 53505 / ASTM D 2240): 20 25 20 10 30 37 Elongation at break ISO 37, S3A [%] 700 80 550 600 300 470 Tensile strength ISO 37, S3A [N/mm²] 1.4 N/mm² (200 psi) 2,9 N/mm² (420 psi) 1.5 N/mm² (220 psi) 1.8 N/mm² (260 psi) 2.5 N/mm² (360 psi) 2.2 N/mm² (320 psi) Tension strength value at 100 % nach ISO 37, S3A 0.3 N/mm² (40 psi) 0,6 N/mm² (90 psi) 0.4 N/mm² (60 psi) 0.2 N/mm² (30 psi) 0.9 N/mm² (130 psi) 0.7 N/mm² (100 psi) Movement capacity max. %: 25 25 25 / 15 15 Fungicide: yes no yes no no no -40°C to +180°C (-40 to +356°F) -40°C to +180°C (-40 to +356°F) -40°C to +180°C (-40 to +356°F) -50°C to +180°C (-58 to +356°F) -40°C to +280°C (-40 to +536°F) briefly (approx. 2 h) +300°C (+572°F) -40°C to +280°C (-40 to +536°F) briefly (approx. 2 h) +300°C (+572°F) cannot be painted cannot be painted cannot be painted cannot be painted cannot be painted cannot be painted B2 B2 B2 B2 B2 B2 Temperature resistance: Paintable: Building material category (DIN 4102): Other *² For easier processing, the cartridges should be heated to room temperature (+20°/+68°F) before use at low temperatures. *³ Normal climate +23°C (+73°F) and 50% relative humidity in accordance with DIN 50014. 124 Catalogue WEICON * Nonfood Compounds Program Listed S2 Registration 158659
244 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.