WEICON Main Catalogue Chemical and technical products Pagina 116
Commercieel klantenaanbod**Beste verkopers van Weicon
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Adhesives / Sealants Recoating behavior of 1-Component Elastic Adhesives and Sealants (MS polymers and polyurethanes) WEICON MS polymers and polyurethanes are basically free of substances which are harmful to the coating composition, such as silicone, and can thus be "recoated". Technical Sprays Various paints and varnishes are widely available, for example:. ► ► ► ► ► Technical Liquids ► ► alkyd resin acrylate resin nitrocombil polymerisate resin paints polyurethane varnishes (DD varnishes) epoxy resin lacquer polyester lacquer Assembly Pastes Except for the above-mentioned alkyd resins, all systems are generally suitable. However, in order to test the compatibility with our products, a suitability in preliminary tests must always be determined individually under the respective practical conditions. Due to the different compositions and the diversity of the substrates, this is essential. It also must be taken into account that not only the immediate first paint layer or lacquer layer, but also all possible intermediate lacquers or top lacquers, have an effect on the bonding and / or sealing. WEICON MS-polymers Lubricants WEICON polyurethanes: ► Flex 310 PU Fast-Bond WEICON TOOLS® ► Painting only after complete curing with suitable colour coating systems. ► ► ► Flex 310 M® in the versions: Classic, Crystal, Stainless-steel, Liquid, Super-Tack, HT 200, 2 K Flex+bond® Solar-Flex®, Aqua-Flex®, Speed-Flex® Recommendation: Directly wet-on-wet, but at the latest within three hours after application of the material. During this period the best adhesion values are achieved. If the adhesive bead is fully cured, pretreatment should be carried out with e.g. primers (as in the case of plastic coatings). Other In general, it must be considered that the curing of the adhesives and sealants is not prevented by a color coating, but will be slowed down. 116 Catalogue WEICON
244 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.