Schuller Eh'klar main catalogue Pagina 124
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
BASIC INFO ABRASIVE MATERIAL WOOD Abrasive paper which is suitable for any wood works CHAIR Abrasive paper which is suitbale for lacquered surfaces METAL Abrasive paper which is used to roughen and sanding metal CAR, PRIMER Abrasive paper which is suitable for primer works and car body works CAR, FINISH Abrasive paper for fine lacquer works. For example: finishing. WATER Abrasive paper which is also suitable for working with water DRYWALL Abrasive paper which is used on drywalls WALL Abrasive paper for rough surfaces FLEXIBLE Abrasive paper on a very light and highly flexible carrier CLOTH The abrasive paper is reinforced due to a cloth carrier CLOSED COATED In case of a closed coating, the abrasive grains lie very close to each other on the grain carrier. Abrasive material which has a closed coating, is mainly used for sanding hard timber and similar materials SEMI-OPEN COATED In case of a semi-open coating, the abrasive grains lie apart so that 70 - 80 % of the carrier is covered with the abrasive grains. Abrasive material which is semi-open coated, is mainly used to sand for example lacquers, plastics and metals and get used generally when a higher material removal is required OPEN COATED In case of an open coating, the abrasive grains lie far apart so that only the half of the grain carrier is covered with abrasive grains. Abrasive material, which has an open coating, is mainly used to sand softwood and get generally used when workings with a high material removal are required 122
154 Pagina’s | Geldig tot 12/2023 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
