Schuller Eh'klar main catalogue Pagina 108
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
BASIC INFO GLOVES FOR CONSTRUCTION WORKS These gloves are suitable for building-, road- and construction works FOR PAINTINGS JOBS These gloves are especially suitable for painters. FOR FINE MECHANIC JOBS These gloves are mainly used by mechanics and installers. The grip safety, a high sense of touch and the protection are the main characteristics FOR GARDENING JOBS This group unites all gloves, which are mainly used for gardening jobs FOR SPECIAL REQUIREMENTS The test tube symbol denotes gloves that meet specific requirements (e.g., solvent resistant, fully dipped, etc.) FOR LOW TEMPERATURES Gloves with this pictogram keep hands, fingers and even the wrist warm at low temperatures CAT. 1 CAT. 2 CAT. 3 EN388 4121X EN511 X21 EN 455 GLOVES FOR NO SPECIAL REQUIREMENTS Category I includes exclusively the following minimal risks: Superficial mechanical injury, contact with aggressive detergents or prolonged contact with water. Contact with hot surfaces not exceeding 50°C Damage to the eyes due to exposure to sunlight, atmospheric conditions that are not of an extreme nature GLOVES FOR SPECIFIC REQUIREMENTS Includes risks other than those listed in categories I and III. GLOVES FOR SPECIFIC REQUIREMENTS Includes exclusively the risks that may cause very serious consequences such as death or irreversible damage to health relating to the following: Substances and mixtures which are hazardous to health, harmful biological agents, Ionising radiation, cuts by hand held chainsaws, harmful noise. PROTECTION GLOVES FOR MECHANICAL RISKS The following parameters are tested: Abrasion resistance (Level 0-4), blade cut resistance (Level 0-5), tear resistance (Level 0-4), puncture resistance (Level 0-4). The achieved levels are indicated in this order under the pictogram. Level „0“ means that the glove has not reached level 1. The letter „X“ instead of a number indicates that the glove has not been tested for the appropriate risk. The higher the value, the better the test result. For example EN388 - 4121D: Abrasion resistance 4, blade cut resistance (coupe) 1, tear resistance 2, puncture resistance 1, blade cut resistance [TDM] 1 PROCTECTION GLOVES AGAINST LOW TEMPERATURES The following parameters are tested: Convective cold (class 0-4), contact cold (class 0-4), water penetration (class 0/1). The achieved levels are indicated in this order under the pictogram. Step „0“ means that the glove has not reached level 1. The label „X“ instead of a number indicates that the glove has not been tested for the appropriate risk. The higher the value, the better the test result. For example EN511 - X21: Convective cold X, contact cold 2, water penetration 1 MEDICAL GLOVES FOR DISPOSABLE USE This standard specific indicates the requirements and the test methods for the physical characteristics of medical gloves for single use. This ensures the adequate protection against contamination during the usage EN374 KTP 106 GLOVES FOR THE PROTECTION OF CHEMICALS AND MICROORGANISMS This standard specific indicates the characteristics of gloves to protect the user from chemicals or microorganisms
154 Pagina’s | Geldig tot 12/2023 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.