Rothoblaas - Wood screws and connectors Pagina 65
Commercieel klantenaanbod**Beste verkopers van RothoBlaas Deutschland
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
STATIC VALUES | BEECH LVL CHARACTERISTIC VALUES EN 1995:2014 TENSION(3) SHEAR geometry LVL - LVL thin steel-LVL plate(1) thick steel-LVL plate(2) thread withdrawal(4) steel tension head pull-through(5) A L b d1 b A RV,k Rax,k Rtens,k Rhead,k [kN] [kN] [kN] [kN] 6 80 50 30 5,19 6 100 60 40 5,19 6 120 70 50 5,19 6 140 80 60 5,19 6,54 6,77 6,77 6,77 12,60 7,20 15,12 7,20 9,20 17,64 9,29 20,16 18,00 7,20 7,20 6 160 90 70 5,19 9,29 22,68 7,20 120 70 50 8,19 11,13 13,75 23,52 10,51 8 140 80 60 8,19 11,13 14,59 26,88 10,51 8 160 90 70 8,19 8 180 100 80 8,19 8 200 100 100 8,19 8 220 100 120 8,19 8 240 100 140 8,19 6,77 7,94 8,57 8 11,13 11,13 11,13 11,13 SPLATE = 8 mm 9 RV,k [kN] SPLATE = 4 mm 7 RV,k [kN] SPLATE = 6 mm L [mm] [mm] [mm] [mm] [mm] SPLATE = 3 mm d1 eq. d1 11,13 15,43 30,24 15,74 33,60 10,51 32,00 10,51 15,74 33,60 10,51 15,74 33,60 10,51 15,74 33,60 10,51 NOTES: GENERAL PRINCIPLES: (1) The shear resistance characteristics are calculated considering the case of • Characteristic values comply with the EN 1995:2014 standard in accordance with ETA-11/0030. a thin plate (SPLATE ≤ 0,5 d1). (2) The shear resistance characteristics are calculated considering the case of • Design values can be obtained from characteristic values as follows: a thick plate (SPLATE ≥ d1). (3) The tensile design strength of the connector is the lower between the tim- ber-side design strength (Rax,d) and the steel-side design strength (Rtens,d). Rax,d = min Rax,k kmod γM Rtens,k γM2 (4) The axial thread withdrawal resistance was calculated considering a 90° an- gle between the grain and the connector and for a fixing length of b. (5) The axial resistance to head pull-through was calculated using LVL beech elements. In the case of steel-to-timber connections, generally the steel tensile strength is binding with respect to head separation or pull-through. Rd = Rk kmod γM The coefficients γM and kmod should be taken according to the current regulations used for the calculation. • For the mechanical resistance values and the geometry of the screws, reference was made to ETA-11/0030. • For the calculation process a mass density equal to ρk = 730 kg/m3 has been considered for LVL beech elements. • Values were calculated considering the threaded part as being completely inserted into the wood. • Sizing and verification of the timber elements, panels and steel plates must be done separately. • The characteristic shear strength are calculated for screws inserted without pre-drilling hole. CARPENTRY | HBS HARDWOOD | 65
369 Pagina’s | Geldig tot 04/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.