Rothoblaas - Plates and Connectors Pagina 144
Commercieel klantenaanbod**Beste verkopers van RothoBlaas Deutschland
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
DIFFUSE AND CONCENTRATED JOINTS FORCE TRANSFER MODE Joints with cylindrical shank connectors transmit the load through high and very localised shear forces: these are transmitted in the structural elements in an uneven manner, stressing a limited volume of timber (demonstrated by the blue areas in the adjacent diagram) . Joint with cylindrical shank connectors . XEPOX epoxy adhesive and SHARP METAL technology allow to spread the load over a very wide area compared to that involved by a cylindrical shank connector . This results in a more homogeneous and less severe stress on the wood component . Joint glued with XEPOX . Joint with SHARP METAL . SCALE FACTORS Cylindrical shank connections typically have diameters between 4 and 20 mm and are loaded with forces proportional to this dimension . Since the force is concentrated, when using these connectors it is necessary to respect the minimum distances and spacing, in order to avoid fragile failures along the stressed wood fibre . In addition, when using connectors with a large diameter, there is a considerable weakening of the net cross-section of the timber elements at the drill holes . The mechanical engagement of the SHARP METAL hooked surface and the pull-through into the timber structure of the XEPOX adhesive allow a load distribution over the whole connected timber area, avoiding splitting and weakening of the cross-section . 144 | DIFFUSE AND CONCENTRATED JOINTS | EPOXY ADHESIVES AND HOOKED PLATES
576 Pagina’s | Geldig tot 04/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
