Riegler Main Catalog Compressed Air Technology and Pneumatics Pagina 404
Commercieel klantenaanbod**Beste verkopers van Riegler
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
CYLINDERS AND CONTROL VALVES 4 ZRL1C series ZRL1C series actuators include piston diameters of 16, 25, 32 and 40 mm with stroke lengths up to 5,700 mm. Suitable for filtered (50 μm) and unlubricated or lubricated compressed air. Please ensure continuous oiling when using lubricated compressed air. Please refer to our type code for the available variants and their corresponding type designations for your individual inquiry. Other special designs are also available on request. Suitable for use in EX areas – ATEX II 2G EX h IIB T4 Gb –10 °C ≤ Ta ≤ +80 °C II 2D EX h IIIC T 130 °C Db max. 8 bar Working pressure: Temperature range: Barrel, end caps and piston axle: Seals: Sealing bands: Piston caps and sliding parts: 0.5– 8 bar –10 °C to 80 °C High-strength anodized aluminum Oil proof synthetic material (NBR/FPM) Stainless steel Abrasion-resistant plastic Example: ZRL1C.250250.KBWF.LL.N.EX Piston Ø [mm] Stroke min.–max. [mm] 16 0100 … 4400 (Ø 16) 25 32 Variant Standard: - Rigid load connection - Screws 10.9 zinc plated - 3 air connections - NBR seals 0100 … 5700 (Ø 25, 32, 40) 40 For speeds ≤1 m/s. SX Same as standard, except: Stainless steel screws F Same as standard, except: FPM seals Lubrication Magnet Standard lubrication LL Slow speed lubrication Recommended for speeds ≤ 0,1m/s (NBR seals)/ ≤ 0,2m/s (FPM seals). Standard: with magnet N without magnet For speeds >1 m/s, at which the seals are exposed to increased temperature development. SXF Same as standard, except: Stainless steel screws FPM seals For speeds >1 m/s. KBW Same as standard, except: Flexible load connection KBWF Same as standard, except: Flexible load connection FPM seals For speeds >1 m/s. For each position in the type code, only one option can be selected by default. Piston Ø and stroke must always be defined as the minimum specification, e. g. ZRL1C.320100. Standard options are not explicitly defined, meaning the position in the type code remains empty, e. g. ZRL1C.320100.LL. 404 ATEX Standard: no EX yes
944 Pagina’s | Geldig tot 12/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.