RHODIUS Main Catalogue Pagina 65
Commercieel klantenaanbod**Beste verkopers van Rhodius
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
CONTENTS CLEANING Cutting ADVICE ON PRODUCT SELECTION Cleaning Brush diameter and fill material length The diameter of the brush and the length of the fill material used are the key factors that determine the result of the surface treatment. If you combine smaller brush body diameters with longer fill material lengths then soft and flexible brushes are the result. These are an outstanding choice for the processing of structured workpieces or for light and gentle surface treatment. Grinding A larger brush body diameter combined with short lengths of fill material results in more aggressive brushes: these can be used for deburring applications as well as for the removal of more widespread soiling. For efficient surface preparation, please select the maximum brush diameter that can be fitted to the equipment’s respective drive system. The brush diameter can also be used to control the peripheral speed and the cleaning performance of the brush, for example. Fine grinding/ polishing Important: Brushes fitted to handheld machines must have a maximum external diameter of 180 mm! Brush fill material density The fill material density depends on the number of wire tips per surface unit. Diamond tools Milling High fill material densities form the basis for optimal performance and brush lifetime, as well as ideal results for e.g. deburring work. Low fill material densities increase the flexibility of the brush and are a precondition for the processing of strongly profiled surfaces. Where brush diameters are the same, fill material density can be influenced by the body size. Optimum orientation of the brush to the workpiece Occupational safety Factors determining the contact pressure of a brush include the brush’s insertion depth in the workpiece. Triple the wire thickness is recommended, e.g. 1.0 mm insertion depth with a wire thickness of 0.35 mm. EN 2024/2025 065
278 Pagina’s | Geldig tot 12/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
