Pneumax - Hauptkatalog Pagina 940
Commercieel klantenaanbod**Beste verkopers van Pneumax GmbH
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Compact cylinders Series 1500 Ecompact-S Series 1500 - Compact cylinders ECOMPACT-S General Based on the ECOMPACT series with piston rods and centring diameters according to ISO 15552 standard. Construction characteristics Body anodised aluminium End caps aluminium alloy casting painted with brass centring bearing Bearing piston rod spheroid bronze on steel band with P.T.F.E. coat Piston rod C43 chromed steel (on request stainless steel) Ø32 and Ø40 acetal resin (aluminium on request) Piston Ø50 and Ø63 aluminium (with FPM seals, aluminium for all of standard diameters) standard: NBR oil resistant rubber, PUR piston rod seals Seals 3 (PUR or FPM on request) Spring stainless steel Fixing screws plated zinc steel Pneumatic actuatiOn Operational characteristics Filtered air. Fluid No lubrication needed, if applied it shall be continuous 10 bar Max. pressure -5°C - +70°C with standard seals (magnetic or non magnetic piston) -30°C - +80°C with PUR seals (magnetic or non magnetic piston) Operating temperature -5°C - +80°C with FPM seals (magnetic piston) -5°C - +150°C with FPM seals (non magnetic piston) Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device and aluminium piston) •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Our Technical Department will be glad to help. Stroke tolerance, minimum and maximum spring loads and cushioning length Bore (mm) Stroke tolerance (mm) Ø32 Ø40 +2 / 0 mm Ø50 Ø63 3 | 144 +2,5 / 0 mm Minimum and maximum spring load (N) Cushioning length (mm) min. max. 19,6 25,5 25,5 42,2 8 44,1 96,3 7,5 44,1 96,3 7,5 6,5 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
1106 Pagina’s | Geldig tot 06/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.