Pneumax - Hauptkatalog Pagina 789
Commercieel klantenaanbod**Beste verkopers van Pneumax GmbH
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Pressure booster Series P+ Method of calculation of the time necessary to increase the pressure in a tank of a given volume using a pressure booster. DATA: P1 = Inlet pressure P2' = Initial tank pressure P2" = Final tank pressure V = Tank volume PROCEDURE: 5) Apply the formula T = V 5 ( T'' - T' ) to obtain the total time needed to take the tank of volume V from the pressure value P2’ to the pressure value P2’. Example of calculation of the necessary time to take a 10L tank from the pressure value P2’ to the value P2” K’ = 0,8 K'' = 1,5 5 5 V = 5L. (12-3,6 )= 8,4 sec. Filling Characteristics (5 litres tank ) 30 25 Filling time (s) T= T’ = 3,6 sec. T'' = 12 sec. 20 T'' 15 10 T’ 5 0 0,2 0,4 0,6 0,8 1 1,2 1,4 1,6 1,8 2 K ratio P2/P1 P1 = Inlet pressure P2 = Tank pressure Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 2 | 215 2 Air Service UnitS 1) Calculate the K' ratio between the initial tank pressure and the inlet booster pressure (P2'/ P1). 2) Calculate the K'' ratio between the final tank pressure and the inlet booster pressure (P2''/ P1). 3) Locate, on the chart illustrating, the booster filling time, the intersection point between the K’ ratio and the curve, then trace a vertical line from the intersection point to the vertical axis and read the correspondent value T’ (in the example chart, to a ratio of 0.8 corresponds a time value of about 3.6 seconds). 4) Repeat the operation for the K’’ ratio, obtaining the T'' time.
1106 Pagina’s | Geldig tot 06/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
