Pneumax - Hauptkatalog Pagina 571
Commercieel klantenaanbod**Beste verkopers van Pneumax GmbH
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Solenoid valves manifold Series 3000 Pt100 inputs modules General - Pt100 inputs modules Pt100 inputs module digitizes signals from Pt100 sensors and transfers acquired data to field bus, via network node. Each input is sampled at 12 bits and transmitted, for convenience, at 16 bits, whose less significant bits padded to 0. Therefore, each digitized signal takes 16 inputs (2 bytes) of the serial node. During the ordering process, it is necessary to verify that the serial node has enough free inputs. Ordering code 5230._ _.0_ It is possible to connect two, three or four wire sensors. Temperature range is from -100°C to 300°C. When sensor is not connected, it is returned a value corresponding to -100°C. 1 Temperature can be obtained from node read value (in points) using this formula: ( ) AIR DISTRIBUTION Temperature (°C) = Points x 400 -100 4095 Following table reports available models: CODE MODEL INPUTS NUMBER OCCUPIED INPUTS 5230.2P.00 Pt100 2 wires 2 32 (4 Byte) 5230.2P.01 Pt100 3 wires 2 32 (4 Byte) 5230.2P.02 Pt100 4 wires 2 32 (4 Byte) 5230.4P.00 Pt100 2 wires 4 64 (8 Byte) 5230.4P.01 Pt100 3 wires 4 64 (8 Byte) 5230.4P.02 Pt100 4 wires 4 64 (8 Byte) Module provides M8 4 pins female connectors and a diagnostic LED for every input. The LED indicates the presence of the PT100 sensor or the overcoming of set temperature threshold. Inputs module power supply is provided by 24VDC power input on the serial system (type A, 4 pin M12 power connector, pin 1) or by module 5030.M12, in case it were installed upstream of the inputs module. Presence of power supply +24VDC is indicated by a PWR green LED. Scheme / Overall dimensions and I/O layout 42 M8 4P female connector 2 90 4 3 1 PIN DESCRIPTION 1 1 NC 2 2 SENSOR + 3 POWER SUPPLY - 4 NC 28 Connection scheme 2 wires probe + Signal Probe Power supply 4 3 - Connection scheme 3 wires probe PIN DESCRIPTION 1 1 POWER SUPPLY - 2 Power supply 2 SENSOR + 3 POWER SUPPLY - 4 4 NC 3 Signal Probe - Power supply 1 POWER SUPPLY + 2 2 SENSOR + 3 POWER SUPPLY - 4 SENSORE - Power supply + Signal Probe Signal 4 3 Power supply 28 1 DESCRIPTION 90 Connection scheme 4 wires probe PIN 42 + Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 | 551
1106 Pagina’s | Geldig tot 06/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.