Pneumax - Hauptkatalog Pagina 365
Commercieel klantenaanbod**Beste verkopers van Pneumax GmbH
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Accessories - Complementary valves Series 900 ► Flip-flop valve G 1/8" - Pneumatic command Coding: 900.52.1.3 Operational characteristics Fluid Filtered air. no lubrication needed, if applied it shall be continuous Max working pressure (bar) 10 temperature °C -5 ÷ +70 Flow rate at 6 bar with Δp=1 (Nl/min) 540 Orifice size (mm) 6 G1/8" Working ports size Air distributiOn 1 Weight 550 g Attention : Pressure of signal "12" must be the same or higher than device inlet pressure. The maximum distance between the pilot valve and the device must not exceed 1Mtr. ( see pneumatic scheme). should be necessary to work at a greater distance it is advisable to use a pneumatic-spring shut-off valve positioned at the recommended distance. ► Flip-flop valve - Electric command with M2 mechanic Coding: 900.52.1.4 Operational characteristics Fluid Filtered air. no lubrication needed, if applied it shall be continuous Max working pressure (bar) 10 temperature °C -5 ÷ +70 Flow rate at 6 bar with Δp=1 (Nl/min) 540 Orifice size (mm) 6 G1/8" Working ports size Weight 660 g ► Flip-flop valve - Electric command with M3P CNOMO Fluid Max working pressure (bar) temperature °C Flow rate at 6 bar with Δp=1 (Nl/min) Orifice size (mm) Working ports size Coding: 900.52.1.5 Operational characteristics Filtered air. no lubrication needed, if applied it shall be continuous 10 -5 ÷ +70 540 6 G1/8" Weight 600 g Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 | 345
1106 Pagina’s | Geldig tot 06/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
