Pneumax - Electric drives Pagina 30
Commercieel klantenaanbod**Beste verkopers van Pneumax GmbH
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Electric cylinders Series 1800 Intermediate trunnion Ordering code: Clevis to be mounted on the barrel to have the centre of rotation of the hinge pin at a point between the end plates of the cylinder. It is attached to the barrel by means of eight pointed grains that block in the “V” groove of the four protruding shapes. In the case of anchorage subject to heavy use, it is recommended to connect the clevis once the right position has been found. TL XV (min.) XV (min.) XV (max.) + stroke XV (max.) + stroke A S XV1 (min.) + stroke XV1 (max.) + stroke XV1 (min.) + stroke Attention: mounting of the clevis with contact to the end plates does not allow the use of the magnetic sensors as the switch limits. XV1 (max.) + stroke TD (e9) TL (h14) TM (h14) UW Weight (g) Maximum axial thrust (N) Size XV XV1 max. + stroke min. + stroke min. max. + stroke 32 49 18 Ø12 12 50 59 180 790 32 62 51,75 87,75 40 62 21 Ø16 16 63 62 270 1200 40 67,5 57 96 144 50 73 21 Ø16 16 75 73 330 1900 50 80,5 73,75 112,75 168,5 63 87 27 Ø20 20 90 87 650 3100 120,5 63 83,5 76,75 121,75 179,5 Minimum cylinder stroke: 30mm (In addition to stroke required) Intermediate trunnion Ordering code: 1320.Ø.12BF Anodized aluminium intermediate trunnion with steel bushes to be mounted on the barrel. This solution allows the cylinder to rotate around the hinge which can be mounted in any position between the end caps. It is attached to the barrel by means of 8 grub screws which secure the trunnion to the extruded barrel. In the case of heavy duty applications it is recommended that the trunnion is secured using expansion pins. In case off applications with high speed, high load and high pressure please contact our technical office. Aluminium with steel bushes UW ØTD ELECTRIC ACTUATION TM TL UW ØTD A S Size 1320.Ø.12F Steel TL TK TM TL XV (min.) XV (min.) XV (max.) + stroke XV (max.) + stroke XV1 (min.) + stroke XV1 (max.) + stroke XV1 (min.) + stroke Please note: If the trunnion is mounted in direct contact with the cylinder end cap, it will not be possible to fit magnetic sensors at the end of stroke. XV1 (max.) + stroke XV XV1 Size TD TL TM TK UW Weight (g) Size 32 Ø12 12 50 18 54 70 32 62 51,75 87,75 40 Ø16 16 63 21 60 110 40 67,5 57 96 144 50 Ø16 16 75 21 72 140 50 80,5 73,75 112,75 168,5 63 Ø20 20 90 27 87 280 63 83,5 76,75 121,75 179,5 min. max. + stroke min. + stroke max. + stroke 120,5 Minimum cylinder stroke: 30mm (In addition to stroke required) 28 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
40 Pagina’s | Geldig tot 06/2025 | Vorige pagina | Volgende pagina
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.