PFERD Tools Main Catalogue Pagina 759
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Drive systems with DIN 10/DIN 15 Flexible shaft 6 Z and handpieces Angle handpiece WZT 6 3.0 DPF/SRF 35 Handpiece with telescopic system, can be connected to flexible shafts, with handpiece-side coupling DPF/SRF (DPF = fixed duplex spring, SRF = flexible expansion ring). 170 255 Max. rotational speed [RPM] 18,000 Special features: ■ Can be connected to all flexible shafts 6 Z DPF/SRF. Contents: 1 collet 3 mm (collet group 14), 2 keys (EM SW 7 mm). Handpiece- Dimensions dia. x side coupling length G / dia. [mm] [mm] DPF/SRF / 10 35 x 170 Transmission ratio Net weight [kg] Item no. Designation 1.38:1 0.170 86210130 WZT 6 3.0 DPF/SRF Angle handpiece WZT 6 45° 6.0 DPF/SRF 45 Handpiece with telescopic system, can be connected to flexible shafts, with handpiece-side coupling DPF/SRF (DPF = fixed duplex spring, SRF = flexible expansion ring). 200 Contents: 1 collet 6 mm (collet group 13), 2 keys (1x EM SW 9 mm, 1x EM SW 14 mm). Special features: ■ Can be connected to all flexible shafts 6 Z DPF/SRF. 260 Max. rotational speed [RPM] 18,000 Handpiece- Dimensions dia. x side coupling length G / dia. [mm] [mm] DPF/SRF / 10 45 x 200 Transmission ratio Net weight [kg] Item no. Designation 1.53:1 0.210 86210140 WZT 6 45° 6.0 DPF/SRF Flexible shaft 7 and handpieces ① D Flexible shaft 7 D With low power output requirements, it is possible to fall below the rotational speed range. The radius of curvature must not be less than 140 mm. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated. L ② L Special features: ■ Special lengths available on request. ■ Cores and hoses with double-sided sliding coupling on request. D ③ L D ④ L Image Rotational speed Drive-side range coupling [RPM] DIN / dia. [mm] Handpieceside coupling G / dia. [mm] Dimensions DxL [mm] Net weight [kg] Item no. Designation 10 / 30 22 / 22 18 x 1,654 18 x 2,154 1.536 1.986 86100509 86100529 BW 7 DIN10/G22 BW 7 DIN10/G22 2M 10 / 30 22 / 22 18 x 1,589 18 x 2,089 1.250 1.700 86200509 86200529 BW 7 DIN10/G22 oHA BW 7 DIN10/G22 2M oHA 10 / 30 22 / 22 18 x 1,553 18 x 2,053 0.850 1.100 86200609 86200629 SCH 7 DIN10/G22 SCH 7 DIN10/G22 2M 7 x 1,589 7 x 2,089 0.400 0.600 86200309 86200329 SE 7 DIN10/G22 SE 7 DIN10/G22 2M Flexible shaft inc. handpiece (HA 7 G22) ① 25,000 – 11,000 Flexible shaft without handpiece ② 25,000 – 11,000 Replacement casing ③ - Replacement core ④ ③ 25,000 – 11,000 25,000 – 11,000 10 / M10 10 / M10 22 / 5/3.85 22 / 5/3.85 Catalogue 9 | 89 9
853 Pagina’s | Geldig tot 12/2026 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.