PFERD Tools Main Catalogue Pagina 218
Commercieel klantenaanbod**
Toon producten
Producten uit de cataloguspagina
25202108
€ 8,80
excl. verzending
13,55 € Adviesprijs
excl. verzending
25202116
€ 21,29
excl. verzending
33,10 € Adviesprijs
excl. verzending
25202114
€ 16,20
excl. verzending
25,15 € Adviesprijs
excl. verzending
25202111
€ 9,79
excl. verzending
15,10 € Adviesprijs
excl. verzending
25202100
€ 6,65
excl. verzending
10,19 € Adviesprijs
excl. verzending
25202107
€ 7,65
excl. verzending
11,75 € Adviesprijs
excl. verzending
25202106
€ 7,50
excl. verzending
11,55 € Adviesprijs
excl. verzending
25202105
€ 7,19
excl. verzending
11,05 € Adviesprijs
excl. verzending
25202104
€ 6,80
excl. verzending
10,40 € Adviesprijs
excl. verzending
25202103
€ 6,80
excl. verzending
10,40 € Adviesprijs
excl. verzending
25202102
€ 6,65
excl. verzending
10,19 € Adviesprijs
excl. verzending
Bekijk alle PFERD producten
Countersink tools HSS countersink Recommended rotational speed range [RPM] To determine the recommended cutting speed range [m/min], please proceed as follows: ① Select the material group to be machined. ② Select the type. ③ Establish the cutting speed range. ① Material group Steel, Non-alloyed construction steels cast steel up to 700 N/mm² Stainless steel (INOX) Tool steels, tempering steels, alloyed steels, cast steel Rust and acid-resistant steels Austenitic and ferritic stainless steels Hard non-ferrous metals Plastics, other materials Construction steels, carbon steels, tool steels, non-alloyed steels, case-hardened steels, cast steel, tempering steels Alloyed construction steels over 700 N/mm² Non-ferrous metals Soft non-ferrous metals Cast iron To determine the recommended rotational speed range [RPM], please proceed as follows: ④ Select the required diameter. ⑤ The cutting speed range and the diameter determine the recommended rotational speed range. Aluminium alloys, brass, copper, zinc Bronze, titanium/titanium alloys, hard aluminium alloys (high Si content) Cast iron with flake graphite EN-GJL (GG), with nodular graphite/nodular cast iron EN-GJS (GGG), white annealed cast iron EN-GJMW (GTW), black annealed cast iron EN-GJMB (GTS) Fibre-reinforced thermoplastics and duroplastics, hard rubber, wood Grey cast iron, white cast iron 2 ② Design HSS HSSE Co5 HICOAT HC-FEP HSSE Co5 HICOAT HC-FEP HSS HSSE Co5 HICOAT HC-FEP HSS HSSE Co5 HICOAT HC-FEP HSSE Co5 HICOAT HC-FEP HSS HSSE Co5 ③ Cutting speed 15–20 m/min 10–15 m/min 10–15 m/min 15–20 m/min 10–20 m/min 10 m/min HICOAT HC-FEP HSS HSSE Co5 HICOAT HC-FEP 10–15 m/min Catalogue 2 | 129
853 Pagina’s | Geldig tot 12/2026 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
Het aanbod is uitsluitend gericht op zakelijke klanten, bedrijven, openbare instellingen, handelaars en freelancers. Alle prijzen in de catalogi zijn exclusief BTW, verzendkosten en eventuele toeslagen.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
Gelieve alle verplichte velden in te vullen (rood onderstreept)
keyboard_arrow_down
Gelieve alle verplichte velden in te vullen (rood onderstreept)
