PFERD Tools Main Catalogue Pagina 101
Commercieel klantenaanbod**Beste verkopers van PFERD
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
TC burrs Cutting speeds – burrs for special applications ① Coarse stock removal Steels up to Steel, 1,200 N/mm² cast steel (below 38 HRC) ② Used for Construction steels, carbon steels, tool steels, Coarse stock removal non-alloyed steels, case-hardened steels, cast with impact load steel, tempering steels Work on edges 2 Fine stock removal Hardened, heat-treated steels over 1,200 N/mm² (over 38 HRC) Tool steels, tempering steels, alloyed steels, cast steel Coarse stock removal with impact load Work on edges Fine stock removal Stainless steel (INOX) Rust and acid-resistant steels Austenitic and ferritic stainless steels Work on edges Fine stock removal Non-ferrous metals Soft non-ferrous metals Soft aluminium alloys Brass, copper, zinc Work on edges Work on edges Hard non-ferrous metals Bronze, hard aluminium alloys (high Si content) Work on edges Fine stock removal Titanium/titanium alloys Work on edges Fine stock removal High-temperatureresistant materials Nickel-based and cobalt-based alloys (engine and turbine construction) Work on edges Fine stock removal Cast iron Plastics, other materials 12 | 2 Grey cast iron, white cast iron Cast iron with flake graphite EN-GJL (GG), with nodular graphite/nodular cast iron EN-GJS (GGG), white annealed cast iron EN-GJMW (GTW), black annealed cast iron EN-GJMB (GTS) Fibre-reinforced plastics (GRP/CRP), thermoplastics Catalogue Coarse stock removal with impact load Work on edges Fine stock removal ③ Cut TOUGH TOUGH-S 3, 3 PLUS, SP 3 HC-FEP, 3 PLUS HC-FEP EDGE MICRO MICRO HC-FEP TOUGH TOUGH-S 3, 3 PLUS, SP 3 HC-FEP, 3 PLUS HC-FEP 5 5 HC-FEP EDGE MICRO MICRO HC-FEP 3, 3 PLUS, SP 3 HC-FEP, 3 PLUS HC-FEP 5 5 HC-FEP MICRO MICRO HC-FEP EDGE ALU 3, 3 PLUS, SP 3 HC-FEP, 3 PLUS HC-FEP EDGE ALU EDGE 3, 3 PLUS 3 HC-FEP, 3 PLUS HC-FEP EDGE ALU EDGE MICRO MICRO HC-FEP SP EDGE MICRO MICRO HC-FEP 5 5 HC-FEP EDGE MICRO MICRO HC-FEP TOUGH TOUGH-S 3, 3 PLUS, SP 3 HC-FEP, 3 PLUS HC-FEP MICRO MICRO HC-FEP ④ Cutting speed EDGE ALU 750–1,100 m/min 250–600 m/min 450–600 m/min 450–750 m/min 600–900 m/min 600–750 m/min 600–900 m/min 250–350 m/min 250–350 m/min 250–450 m/min 350–450 m/min 350–600 m/min 600–750 m/min 450–600 m/min 450–750 m/min 250–350 m/min 250–450 m/min 350–450 m/min 350–600 m/min 450–600 m/min 450–750 m/min 900–1,100 m/min 600–900 m/min 600–1,100 m/min 900–1,100 m/min 600–900 m/min 250–450 m/min 250–600 m/min 900–1,100 m/min 250–450 m/min 450–600 m/min 450–750 m/min 250–450 m/min 450–600 m/min 450–750 m/min 350–600 m/min 350–750 m/min 250–450 m/min 450–600 m/min 450–750 m/min 250–600 m/min 450–600 m/min 450–750 m/min 600–750 m/min 600–900 m/min Work on edges
853 Pagina’s | Geldig tot 12/2026 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
