Mahr - Product Catalog Pagina 546
Commercieel klantenaanbod**Beste verkopers van Mahr
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
MarSurf UD 130 / LD 130 / LD 260 Combined Contour and Surface Measuring Station UD 130 / LD 130 / LD 260 MarSurf Surface Measuring Instruments Combined contour and surface measuring station DESCRIPTION MarSurf UD 130 The MarSurf UD 130 closes the gap between the high-end solution MarSurf LD 130/LD 260 and the new standard combination measuring station MarSurf VD140/280 with two probe systems. The technical specifications of the MarSurf UD 130 are based on theinterferometric probe system and the positioning speeds that reduce themeasuring time for each workpiece. MarSurf LD 130 / LD 260. A step into a new dimension Combined contour and roughness measurements in just one step comes courtesy of proven cuttingedge technology from Mahr metrology. The MarSurf LD 130 and MarSurf LD 260 measuring stations have been systematically developed to draw on the experience from the first generation of equipment. • Roughness and contour in just one step • High measuring and positioning speed cuts measuring times dramatically • Innovative probe system removal • Quick and reliable probe arm exchange with simultaneous probe arm detection by magnetic holder • Long measuring length up to 260 mm (MarSurf LD 260) with a measuring stroke of 13 mm (100 mm probe arm length) or 26 mm (200 mm probe arm length) • Modular construction for ease of maintenance • No need to fully dismantle the measuring stand for maintenance Supplied with: • MarSurf XCR 20 including midrange LD, MarWin software Easy Roughness & Contour, Mahr license key • TFT monitor • MCP 21 manual control panel • MarSurf LD 130 or LD 260 drive unit including LP D 14– 10– 2/60 LP D 14– 10– 500 probe system and probe arms • Calibration standard for contour 1, accuracy class 1 • MarSurf ST 500 CNC measuring stand with 700 mm x 550 mm granite plate (including control module) • Dampening element set • CT 300 XY table TECHNICAL DATA UD 130 LD 130 Traversing lengths 0.1 mm to 130 mm 0.1 mm – 130 mm 0.1 mm – 260 mm Measuring force 1 mN to 30 mN, software-adjustable 2 nm 0.5 mN to 30 mN, software-adjustable 0.8 nm 0.5 mN to 30 mN, software-adjustable 0.8 nm 0.1 mm/s to 5 mm/s; for roughness measurements 0.1 mm/s to 0.5 mm/s are recommended 0.1 mm/s to 30 mm/s 0.02 mm/s to 10 mm/s; for roughness measurements 0.1 mm/s to 0.5 mm/s is recommended 0.02 mm/s to 200 mm/s 0.02 mm/s to 10 mm/s; for roughness measurements 0.1 mm/s to 0.5 mm/s is recommended 0.02 mm/s to 200 mm/s Resolution Measuring speed Positioning speed APPLICATIONS ACCESSORIES Machine building • Roller bearings, threads, threaded rods, ball screws, shafts, racks, ball heads, valves • • • • • Measurement close to the production area • Contour and surface roughness measurement in semi-automatic and fully automatic operation Automotive industry • Engine parts including cylinder block, cylinder head, crankshaft, camshaft, valves, steering, gearbox, injection systems, turbocharger Medicine • Contour and surface roughness measurement for hip and knee endoprostheses, contour measurement for medical screws, contour and surface roughness measurement for dental implants ST 750 measuring stand Parallel V-block V-block, equipment table Measuring cabinet Extensive range of probe arms Software options • Profile processing • Dominant waviness (WDc) for MarWin • ISO 13565– 3 surface parameters • User defined parameters • Topography • Topography with MfM • Thread evaluation • Chamfer evaluation (in accordance with Bosch standard) • QS-STAT / QS-STAT Plus • Digital I/O set Optics • Contour and surface roughness measurement of aspherical lenses For more information, please visit our website: www.mahr.com 542 LD 260 MarSurf | Surface Measuring Instruments
708 Pagina’s | Geldig tot 12/2023 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.