Kukko puller guide Pagina 5
Commercieel klantenaanbod**Beste verkopers van Kukko
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
EXTERNAL-pulling EXTERNAL-pulling 3rd step: How much force is required? Selection of the right external puller A normal amount of pressure is required. The part to be removed is on a shaft and is freely accessible from the outside! High pressure is required because the part to be removed is particularly secure, or rusted. pull pull pressure EXTERNAL diametre depth availible space defines the spreads defines max. reach defines the size of the puller jaw Puller with mechanical pressure spindle Requirement: · The same removal application is always used. Puller with long hydraulic spindle 4th step: Select model 2nd step: Selection of the puller type Requirement: · The puller is used for various applications. · The puller must be able to change characteristics e.g. increase the reach etc. EXTERNAL 1st step: Measuring the space available ? mm Requirement: · The same removal application is always used. · Same application at different depths. Requirement: · The bearing is flush. · It is especially important that the puller arms do not slip off. Recommendation of KUKKO Recommendation of KUKKO Recommendation of KUKKO Recommendation of KUKKO Puller with sliding, parallel puller jaws Puller with self-centering puller jaws (autogrip) Puller with swivel puller jaws Puller with side tension clamps. The selected pulling tool normally states the necessary power and pulling force. However, in order to be absolutely sure, you should always choose the largest possible model for dimension ranges which cross over. Detailed dimension and performance details for all models can be found at www.KUKKO.com For example: diametre: depth: availible space: 1st step: Measuring the space available 142 mm / 120 mm / 135 mm 135 mm / 120 mm / 220 mm unlimited 2nd step: Selection of the puller type The puller jaws can be moved continuously (even asymmetrically) on the cross-beam, and can be fixed to the crossbeam using a bolt connection or knurled knob. 8 The two puller jaws are connected to each other. The pullers therefore ensure automatic self-tensioning and self-centering of the jaws. Series available Series available 11 ; 20; 20+; 20-S; 20+S; 20-S-T 20-S+T; 30; 30+; 30-S; 30+S 30-S-T; 30-S+T; 110; 120; 130 43; 44; 45; 482; 483; 844; 845 The jaws and the cross-beam are connected by movable brackets. As the spindle pulls, the jaws tense and tighten firmly. An additional option is swivel-jaws pullers. Reversing the puller jaws expands or reduces the reach. Series available 41; 42; 46; 47; 201; 203; 205 206; 207; 208; 209 To remove flush parts the puller jaws grab beneath the part to be removed when pulling on the side clamps and loosen the part even before the actual pulling process. The clamp presses the puller jaws securely onto the part to be removed. This ensures that the puller jaws do not slip off. Series available 204; 210 www.KUKKO.com Specification: There must be pulled various bearings at different depths. Target: We are looking for a puller which can be individually adapted. According to the puller guide should be used pullers with sliding puller arms that are always parallel. 3rd step: How much force is needed? The bearings are on the shaft. According to the puller guide should be used a puller with a mechanical spindle. 4th step: Select model According to the KUKKO website choose the pullers from series 20 and 30 in size 2. The decision falls to : 30-2+ and 2-V-150-S Advantage: • with the 3-jaw model, you have the best possible load distribution and a particularly secure hold. • You can adjust your puller to the relevant reach by buying the extensions. • The quick adjusting capability allows the reach to be changed quickly. www.KUKKO.com 9
17 Pagina’s | Geldig tot 12/2020 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.