KS Tools Tools for industry and trade Pagina 167
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
1 2 KURZWDREHMO TORQUE WRENCH WITH CLOSE-GAP RELEASE 3 As a result of the close-gap release, the chance of over-tightening is reduced and, in addition, this mechanism enhances the accuracy when fastening the screw. A palpable and acoustic snap indicates that the desired torque value has been achieved - in addition the mechanism resets automatically to the initial position. 4 5 6 Adjustment: Easy and accurate torque adjustment by means of special winding knob in the handle. 7 8 COUNTER CLOCKWISE FASTENING CLOCKWISE FASTENING 9 10 Four-fold scale: Micrometer dual scale in Nm and lbf•ft divisions 11 Accuracy of Ratchet head: Using an insert-type box wrench enables controlled fastening in clockwise and counter clockwise directions 12 ±4 % of the scale reading 13 Handle: Ergonomic handle designed for comforatble use 14 Corrosion: Durable protection against corrosion using robust steel with a matt finish chrome-plated surface 15 Serial number: A permanent and unique serial number is applied on all torque wrenches, which provides unique product identification. 16 Signal: An audible and palpable snap indicates that the desired torque has been achieved 17 18 Torque wrench with close gap release 19 • Actuation accuracy: ±4 % tolerance of the set scale value • Precise reading accuracy for a minimum 5.000 tightening cycles • For controlled fastening in clockwise and counter clockwise directions • The direction of rotation (clockwise and counter clockwise) can be changed by simply rotating the square drive piece • Four fold scale in Nm, Kg•fm, lbf•in und lbf•ft divisions for precise adjustment • An audible and palpable signal when the desired torque value is achieved • Torque setting is easy by pulling out, adjusting and pushing in the winder in the handle • Secure locking possibility • Ergonomic handle designed for comfortable use • Square drive adaptor to DIN 3120 / ISO 1174 with ball lock • Individually marked with serial number - unique product identification • including calibration declaration of conformity according to DIN EN ISO 6789:2017(E) - traceable to national standards 20 21 22 23 24 25 26 516.3510 3/8” 2.5-11 2-8 0,50 0,5 300,0 0,56 516.3515 3/8” 5-33 4 - 24 1,00 1,0 405,0 0,69 516.3520 3/8” 12-68 10 - 50 2,00 2,0 480,0 1,00 516.3525 1/2” 12-68 10 - 50 2,00 2,0 480,0 1,00 516.3530 1/2” 25-150 20 - 110 5,00 2,0 575,0 1,70 516.3535 1/2” 50-250 40 - 180 10,00 5,0 605,0 2,30 516.3540 1/2” 70-350 50 - 260 10,00 10,0 815,0 3,00 516.3545 3/4” 140-800 120 - 580 20,00 20,0 935,0 6,50 516.3550 1” 200-1000 150 - 750 25,00 25,0 1030,0 9,70 516.3555 1” 500-2000 350 - 1500 50,00 50,0 1400,0 18,00 27 28 29 30 167 i
816 Pagina’s | Geldig tot 07/2024 | Vorige pagina | Volgende pagina
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.