KIPP Catalog Operating Elements & Standard Elements Pagina 975
Commercieel klantenaanbod**Beste verkopers van KIPP
K0345 Indexing plungers without collar D2 Stainless steel version: Indexing pin hardened: Threaded sleeve 1.4305. Indexing pin 1.4034. Indexing pin not hardened: Threaded sleeve 1.4305. Indexing pin 1.4305. H F L L1 L2 Form J with threaded pin without locknut Material: Steel version: Indexing pin hardened: grade 5.8. -0,02 D -0,04 Version: Steel version: Indexing pin hardened, ground, black oxidised. D1 Form K with threaded pin with locknut SW Stainless steel version: Indexing pin hardened, ground and bright. Indexing pin not hardened, ground and bright. Sample order: K0345.01206 Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation by e.g. program controlled pneumatic cylinder or by remote control using bowden cables. A washer is available to aid screwing in the indexing plungers. The washer is placed on the threaded sleeve so that the carrier pins engage in the slot. On request: Special versions. Accessories: Spacer rings K0665 974
1391 Pagina’s | Geldig tot 12/2022 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.